• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Cnet440

  1. C

    Tr6060 floor pan mods

    All good, thank you for your reply I've been looking into the USCT perimeter tunnel and from the very few images that I've seen I think it will create an issue still due to the location they have their " 3/16 upper crossover" it's in the factory location as the original upper member but is wider...
  2. C

    Tr6060 floor pan mods

    Hey Rick, I'm getting ready to dive into a tr6060, 6.4l swap and just curious were the top mount shifter came out in the floor pan area. I've been looking at the uscartool frame but I'm worried the shifter comes out directly in the middle of the top crossmember support. What are your thoughts...
  3. C

    Gathering parts for a 6.4 swap need advice

    Hopefully this thread is still alive. I'm just getting started in my 6.4 swap have lots of questions. I just picked up a full drop out from a 16 challenger. So 6.4 plus tr6060, wiring harness, TIPM, pcm, all 3 pedals, and shifter. The swap is going into 69 coronet. My plan is to use the stock k...
  4. C

    Backward C stamp? What does this mean?

    the same line working over multiple years working at all different plants only messing up with the letter "C"????? Also if thats the case lets say the C was in its correct orientation what does it mean?
  5. C

    Backward C stamp? What does this mean?

    well Ive been looking for the answer to this for a bit now..On and off mostly. but this and 1 or 2 other places are the only times this has ever been mentioned. Its odd that there are quite a few of the inverted "C" blocks out there( or at least lots of people with questions about it). there are...
  6. C

    Backward C stamp? What does this mean?

    Was a solution ever found for this cause my 440 has the inverted "C" too
Back
Top