Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Cool!
Just an FYII from the cheap seats. it will be tough to get good / complete powder coverage inside the tube due to Faraday caging. It will wrap an inch or two on the ends but the majority of the inside will be bare steel.
It's actually the third one ever, a really tough undertaking with those two colors compounded by his desire for a translucent candy red metallic (it needs a shiny / metallic basecoat to achieve that effect). It was in great shape for its age which saved on bodywork but the masking took quite...
A few weeks being sicker than ever followed by a fractured ankle after missing a step in the basement has delayed the **** presentation a bit. It's hell gettin old guys! Avoid it if at all possible.
:rofl:
Here's a few new ones since my last update.
Yes, even a few LS parts which I'm...
Oooohhh, Ansens!!
It kind of depends on what's you used on the intake lol but it's not like your dirty old used intake will "poison" your media or anything. It typically just turns into dust when it reaches the end of its lifespan. Sifting it in between projects can also speed you along in the...
What you're blasting and what you're trying to remove should guide your media choice.
Quite a few of you gentlemen sport intakes I've restored/finished for you, several almost two decades ago now. How is it holding up to use? Any new staining or a resurfacing of old stains? Any issues with...
Custom Holley / Mopar Performance package includes: fully restored low deck Street Dominator intake (383/400), part number 701R-10, with hardware and end tabs, valley pan, big block Mopar Performance valve covers and air cleaner assembly in 7 powder colors, 2-tone new Mopar M hold down and new...
Chrome replica powders look all right as long as they aren't next to or visually near "real" chrome (I.e., powdered bumperettes on a triple plated chrome bumper). You can tell at a glance it's not the same.
Most replicas are not UV stable on their own either so a clear topcoat is required ...
Thank you for that Brian!! I've been sick with some nasty flu for almost two weeks and you gave me a much needed smile.
A little car wash soap is all you'll need if they get dirty.
These were on my '68 Fastback Cuda when I bought it in 1991. They're still there, and always will be. I consider them part of its history, placed there by one of the four who owned it before I did. I added a shop decal to the driver's side.
On arrival, brand new from Summit. The machining above the runners was so extreme it could cut ya open!
It will never hurt anybody now though!
I LOVE intakes!! Some are smooth and some are bumpy but most are a combination. Rather than "polished" perfection, I strive for uniformity so each...
Realizing I haven't updated this since November, here's my latest creations.
My first Christmas ornament ... a lady on eBay makes them out of aluminum cans
These next two might be for sale after February 25.
Before ...
After ...
This was a challenge!
My first Magnum intake will...