Recent content by D.Dog

Complete frame on restoration: New interior, door panels,carpet,seats,rear seats recovered New windshield,window seals, door seals, tinted windows. Mild rebuilt 440 motor,278 crane cam,346 heads,stock exhaust manifolds, tti exhaust syst. Rebuilt BB raidiator,3 core/w shrould, runs cool 180 in...

Sir! Could you email me your phone so I can ask about particulars on your car. I am a previous owner of car few years back and I am in central Mi. Thanks! D.Dog

Hosehead! I have done this exact swap w/ my 65 Coronet wagon, using a 66 column. It works great all turnsignal wiring uses same plug as 65 harness. Only difference I used my 65 column braket. Also you can use a 66 later BB 727 . You will need to modify a shift braket on frame rail using all...

Does anyone have a source for buying perforated headliner board material? I'm am thinking I might have to use plastic sheeting and cover it with headliner material. Any ideas would be appreciated. Thanks! D.Dog

Custom wagon fuel tank Spare tire storage! 62 Max, I am just going to put it in rear area and cover it. This tank install works for me as I did not have a tank in the car when purchased. I'll try and enclose a couple of photos. Made a new floor bottom and just put sump thru floor with...

Fix for wagon spare tire floor! I had just a bad floor in spare tire tub. Had my body guy cut it out and fit a RCI 16 gallon fuel aluminum fuel slightly droped down. Put a side fill up to original side opening w/ a custom tube. I dilld'nt have orignial tank. Worked really nice since...

65 Coronet wagon Exhaust system update! GrabberOrange69! Finally got the TTI system installed. Fits really nice. I have the super turbor dynmax mufflers. They are pretty mellow but I did't want to hear a noisy drown. I want thank 62 max for info & photos. I will have...

Just started install on my 65 Coronet wagon w/440 & stock 65 manifolds. w/H pipe. Head pipes fit great & H pipe fits but seems like H pipe length w/Dynomax25.5 muffs are to far rearward. TTI tec rep says to loosen up all connections including manifold connections. I can't see where this...

All new 10 in. drum brakes 65 Dodge Coronet, wheel cyl brake shoes,drums good. Taken spindles & drums from a 66 dodge. Is it possible to have backing plates on the wong side? Shoes have dobeen check for correct placement against my 65 dogde service manual. This is really...

I have a loud popping bind noise when applying brakes at a roll. Have checked my brake rebuild and they work OK. I thought it was my brakes but a mopar mechanic thinks there is a loose bolt on the suspension right front. Everything has been rebuilt with new bushings and brakes &...

Hosehead! I have did this same swap in my 65 Coronet wagon with a 440 & 70's BB727. I took the steercolumn from a 66 Coronet w/318 auto. You need the crossbar linkage that came with 66 dodge. Then I had to modify the bracket to bolt to frame rail of your 65'. Your wiring the 66...

New 10 in drum,whl cyls shoes lines dot 5 fluid on my 65 wagon. Never run yet on jack stands. Soft pedal after bleeding and fluid won't go down in rear resavore when bleeding front brakes. This master cyl was used on my previous 63 dodge same setup worked great. Something is wrong or...

Gents! Here is couple of photos of 65 440 wagon! Just about ready to fire the 440

Need a little help starting new 440 w/ 346 heads Crane 278 HMV cam Motors already primed rolls over, just need to connect coil and plug wires and set timing close. I have done this before but its been 10 yrs. ago. Everything thing is new, Mopar dist.w/ orange box, new wires, new...

Hose head! I did excact same thing on my 65 Coronet wagon. Steering shaft from 65 manual drops right in to mine. Got the complete linkage & Z bar from 318 dodge coronet.Then you can you a later 727 BB trans, even blinker harness plugs to the 65 harness, D Dog!