• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Dan Brewer's latest activity

  • Dan Brewer
    Dan Brewer reacted to padam's post in the thread Transmission Carnage with
    Thanks!
    .
    I don’t know where us 4 speed guys would be without Brewers.
  • Dan Brewer
    Dan Brewer reacted to dvw's post in the thread Transmission Carnage with
    Thanks!
    .
    The Brewer family are great people, not to mention good at business. Doug
  • Dan Brewer
    Dan Brewer replied to the thread Creaking clutch fork.
    Yeah, same part used with the QT or new LW bell. Not heat treated, not even made correctly if you ask me...
  • Dan Brewer
    Dan Brewer reacted to padam's post in the thread Creaking clutch fork with
    Agree
    .
    That’s a Lakewood (Holley) bracket. Mine did the same. POS parts.
  • Dan Brewer
    Dan Brewer reacted to ladd69's post in the thread Creaking clutch fork with
    Agree
    .
    I believe I found the real issue to my problems. My fork pivot bracket is bent so that the fork sits to far out. I think that the...
  • Dan Brewer
    Dan Brewer replied to the thread Creaking clutch fork.
    Doesn't look like the fork is far enough into the bellhousing to properly fit the clutch bearing.
  • Dan Brewer
    Select by Category - Mopar A833 4-Speed Transmission & Component Specialists The Malwood pedal with the master mounted under the dash...
    • CPK-C65-HYD.jpg
  • Dan Brewer
    Dan Brewer replied to the thread Dust shield.
    With a manual transmission, you have a lower heavy steel 5 bolt cover, and there is also a small shield that goes behind the starter...
  • Dan Brewer
    Dan Brewer replied to the thread Shifter issues.
    What I noticed from watching your video showing the linkage is a couple things. Yes, the nuts were loose...but look how much slop is in...
Back
Top