• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by DoubleA

  1. D

    First Mopar

    Are you willing to sell any? If so how much?
  2. D

    First Mopar

    Yes. the pulley itself on the ac belt groove is (was) suspended in rubber and vulcanized to the pulley, i presume to help in damping. but there is a balancer inboard from the pulley and this is at the most outboard end. is there another non damped pulley i can use?
  3. D

    First Mopar

    Sorry its a 318
  4. D

    First Mopar

    Here is the ac portion of my pulley separated. The car is a 4dr Belvedere II, Its a really nice survivor. l
  5. D

    First Mopar

    Colorado Dave, it looks like BPE only makes then for 70 and later. I dont know what the difference is. It turns out my had one of the 3 groove pulleys with a heavy rubber damper and the rubber failed and that is how the A\C portion of the pulley was attached. it seems to be a hard part to...
  6. D

    First Mopar

    Thank you.
  7. D

    First Mopar

    Howdy, this is my first Mopar so I am new to these cars. I just got a '67 Belvedere II on a trade and I dig it. Please pass along any places you recommend for parts and such. I need to get a new pulley (3 groove for the AC) but seem to only find aftermarket power pulleys which I am not...
See more
Back
Top