dvw's latest activity
-
dvw replied to the thread Start circuit question.Circuit; Battery + to ignition switch. Then power out on the yellow wire thru the bulkhead to the starter relay. The relay has battery +... -
dvw replied to the thread Electrical education?.After working in the auto repair field for over 30 years my carreer changed paths somewhat. Went to work at Chrysler Engineering in the...
-
dvw replied to the thread Bob weight for a stock 426 hemi engine?.If they are stock pistons and rods on an aftermarket crank it's going to be tough to balance. Those cranks are generally conterweighted...
-
dvw replied to the thread Video of SSKA Heads Up Race at Vegas Final Divisional.Looks like it was all in the first 330. You guys were better the rest of the run. Was he in a touch deep? Didn't appear to be. Doug
-
A valve seat fell out of the old Stealths, killed the valves, destroyed the heads and pistons last fall. We are almost back together...
-
dvw replied to the thread Heads UP SS/KA Race this round Vegas between 340 A Bodies.I love making close runs. Had a couple of wins this year by a .001 stripe. Very familiar with the wind as well. My 64 sedan with a 5"...
-
dvw replied to the thread 727 swapped for what.So if it's got a scalloped flex plate the converter isn't a factory counterweighted converter. In that case ther is no way of knowing...
-
dvw replied to the thread Rebuilding LemonWedge..Met Greg last year at Norwalk. Nice guy and a good racer to boot. Doug
-
dvw replied to the thread Welding out the last cage…..It may be tough. But how many here could weld like that when they were young? Not me. It's me longer these days. But still do everything...
-
-
I had the back cam plug out " water freeze plug", and used a dial indicator. I also used the roller bearing cam button, not the nylon...
-
dvw replied to the thread 727 swapped for what.If it is a factory pushbutton case with 2 cables then the trans output shaft and tailhousing are 65. If it still has still push button...
-
dvw replied to the thread Rebuilding LemonWedge..Mine has the 774/775 (.860") slant six bars it came with. It's funny my sons car also has the same bars and is lighter in front than...
-
dvw replied to the thread Yay, trunk surprise.I'm still skinny, kinda Doug
-
dvw replied to the thread Yay, trunk surprise.In high school I had a 67 Belvedere. The rear seat back was modified to hang on the upper hooks only. We would sneak people in to the...
-
dvw replied to the thread Rebuilding LemonWedge..The decision to make a no compromise racecar is a good one. As we all know its still a compromise As most of us are still using the...
