• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

DynaBro's latest activity

  • DynaBro
    DynaBro reacted to PlymouthMakesIt's post in the thread My untimeable motor. with
    Like
    .
    The most likely things that will cause timing to jump around are: 1. Sticking advance weights. Make sure they're free. 2. The MSD box...
  • DynaBro
    DynaBro reacted to eldubb440's post in the thread Bought a 70 with
    Like
    .
    got the Challenger on the spinner and shop rearranged....I'm chomping at the bit to play with frame connectors, but I have a series of...
  • DynaBro
    DynaBro replied to the thread My untimeable motor..
    Very informative.
  • DynaBro
    DynaBro reacted to dvw's post in the thread My untimeable motor. with
    Like
    .
    If the idle speed is close to what it was set at the issue is inside the distributor. What this video for disassembly Doug
  • DynaBro
    DynaBro replied to the thread My untimeable motor..
    I did the math and verified it with Grok. At 3000RPM the 2.36 inches counterclockwise from the TDC mark should align with TDC.
  • DynaBro
    DynaBro replied to the thread My untimeable motor..
    It's a bright white line under that black line and piece of tape at the very bottom. I placed some tape there with another line at 2.36...
  • DynaBro
    DynaBro replied to the thread My untimeable motor..
    Plugging PVC port did nothing. It is sucking air. Installed a brand new grommet and it's just as useless as the old one. Is there...
    • unnamed.jpg
  • DynaBro
    DynaBro replied to the thread My untimeable motor..
    Well broke down and I ordered a new one from Rick but in the meantime will keep trying any of your ideas that aren't super work...
  • DynaBro
    DynaBro reacted to Fran Blacker's post in the thread My untimeable motor. with
    Like
    .
    They problems with some MP distributors said Mopar Action E Booger. Check distributor for side play. That will let timing bounce around.
  • DynaBro
    DynaBro reacted to 68 Sport Satellite's post in the thread My untimeable motor. with
    Like
    .
    I remember reading that. He even suggested a bushing with a set screw to combat this which seemed to work.
  • DynaBro
    DynaBro replied to the thread My untimeable motor..
    Very interesting theory. I will do this this afternoon. It's a typical MOPAR Performance. It had Blue Streak cap and rotor that I...
  • DynaBro
    DynaBro reacted to Geoff 2's post in the thread My untimeable motor. with
    Like
    .
    When you rev the engine after setting timing....does the engine come back to the same idle rpm? If yes: sounds like the centri weights...
  • DynaBro
    DynaBro replied to the thread My untimeable motor..
    I am leaning heavily toward just replacing the distributor.
  • DynaBro
    DynaBro reacted to YY1's post in the thread My untimeable motor. with
    Like
    .
    I had a bad bearing in my distributor. Did the same thing as you are describing.
  • DynaBro
    DynaBro replied to the thread My untimeable motor..
    Typo. Very frustrating evening. I meant the light does not have a dial.
Back
Top