Recent content by EJL

Can I ask what you ended up using for headers?

Curious what you ended up doing for headers and connection to exhaust for your swap. I also used Holley motor mounts and using 8HP70 trans. Any advice would be appreciated.

Here's a before and after on my "wanna" Bee

PM sent

I was able to get another sample of paint to try. It's an improvement, but still a touch darker than I like. In picture below, the sample labels are as follows going left to right. Sample 1 - First color sample of base coat sprayed on black sealer. Sample 2 - Second color sample of base coat...

No, the base color code I'm starting with is H7/TH7 Prowler Purple Metallic

Here's the first pass at picking final color for the car. It's a Plymouth Prowler purple with some black added to darken it up. I think it is a little darker than I expected, so I will have the black cut in half and shoot another sample.

Been a while since I've made an update. I have been busy working on other projects. Spent a portion of last winter dressing up my new building. Installed tongue & groove board a little over 8 foot high. Plan is to finish the rest up to the ceiling with white metal, but not sure when that...

If you are looking for the white plastic strips that go between the hardboard panels and snap onto the metal bows, I'm your guy. I've tried shipping to other customers in Europe before with not much success. You will need to work with a broker in the US and I can ship them there to handle the...

I'm interested, but your inbox is full. Please contact me regarding shipping cost and payment.

Bought the Holley mid mount system for the engine. Decided to get everything swapped out to make sure I got everything. Didn’t want to wait and find out something was missing and it’s 6+ months after purchase and find out I’m screwed. Instructions were pretty straightforward and assembly was...

Getting back to the car now that summer activities are winding down. Engine and trans fitment is complete. Last item I wanted to confirm was if fresh air intake would fit without cutting a hole in inner fender. I had to modify K&N kit I bought, but it cleared without removing sheet metal. We...

Yes, I'm receiving your PM's. I'll answer you there.

Made a little progress. Got the grommet put in and harness pulled through. We put the engine back in and everything seems to marry up to engine connections. Only issue is oil pressure and MAT sensors don’t match plug connectors on harness. Had to order a different sensor for oil pressure as...

Bit more progress as of late. Boss gave me the green light to buy the new HVAC system so I could mock that up and see where I have clearances on firewall to route engine harness. With that in place now we know where we can mount ECU between dash, HVAC and firewall. Since I want to hide the...