• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Eric F

  1. E

    Vibration in vehicle above 66 mph. Then oscillating then somewhat smooths out.

    Stock replacements from Napa.
  2. E

    Vibration in vehicle above 66 mph. Then oscillating then somewhat smooths out.

    Yes he did balance it. And he did it a 2nd time after I stated I still have a vibration. He stated that the balance if correct.
  3. E

    Vibration in vehicle above 66 mph. Then oscillating then somewhat smooths out.

    Answer to the question does it vibrate sitting still no. It’s smooth I even ran the rpm up to 3200 rpm and it’s smooth. I have tried installing 2 degrees shims between the diff and spring. Pointing the nose of the diff up car gets worse. Pointing the nose of the diff down makes NO difference...
  4. E

    Vibration in vehicle above 66 mph. Then oscillating then somewhat smooths out.

    1970 Road Runner. The vehicle has what feels like a driveline type vibration that comes in about 65-66 mph. It turns into an oscillating type vibration around 68mph to about 72 then the oscillation tapers out. About 2800 -3200 engine rpm. I bought the car in 2019 and was a rolling body. It came...
  5. E

    Engine runs hot in slow traffic

    I bought the car apart. I had no radiator. No fan nada. I had to build a cooling system
  6. E

    Engine runs hot in slow traffic

    Car was apart when I bought. There was nothing. No radiator, no fan no pulleys. Nothing.
  7. E

    Engine runs hot in slow traffic

    Stock pulleys from 440 source. Reproduction for non A/C car.
  8. E

    Engine runs hot in slow traffic

    Yes running a mech gauge and factory. Also verifed temp with my snapon thermal imager temp gun. Timing is at 12 total 36. It doesn’t matter if I more or less timing
  9. E

    Engine runs hot in slow traffic

    70 Road Runner 383 .060 9.3 compression. Mopar aluminum water pump housing with 8 impeller water pump. 180 degree thermostat. ‘my car originally 22 inch 3 core radiator with a solid fan and shroud. When I put my car together after sitting apart for 27 years. The engine was rebuilt. I installed a...
  10. E

    Urethane leave spring bushings

    Has anyone installed Urethane leave spring bushing? Did the vehicle exhibit any vibration through the car, ride harshness other than the dreaded squeak. I can’t remember if I put the bushings in when I owned my car in the 80’s or the owner in between my first and 2nd time owning the car. Thanks
  11. E

    Is this Comp Cams Camshaft wiped-out?

    The hydraulic cams going flat is a huge issue. the pictures of your cam look ok. Being your intake is off along with the valve train take a look at your lifters and make sure they have a slight crown too them. Also the cam lover have slight taper to make the lifters spin in the bore. A local jet...
  12. E

    Later transmission crossmenber

    1970 Road runner 383 automatic. Does anyone know if the later 71-72 transmission crossmember and floating transmission mount work on a 70 with the as I call it block style mount.
  13. E

    Is there a different master cylinder for improved braking?

    70 Road Runner 11 inch manual drums at all 4 wheels. I just did rear brakes with drums, shoes , wheel cylinders, springs kit.then I’m doing the fronts next using muscle car front brake shoes.I’m wondering if there is a difference master option without going power brakes. Thanks
  14. E

    Disc brake conversion

    I’d like to thank everyone for there responses. It’s less expensive to buy a complete kit than it is to piece on together.
  15. E

    Disc brake conversion

    I may walk through Morro Bay show. I’m not showing
See more
Back
Top