Recent content by Fabman

Yep...saw them..but thanks....why'd you drop Amazon?

NAPA will probably have the standard 1 wire socket

Anyone ever find a two wire side marker light bulb sockets? Looking for a newer design with the 12 volt AND a ground wire - to fit specifically 70 Road Runners...which is more than likely the same size for most 70 B - Bodies...

BUT...this is an already painted grille..not bare plastic

Thanks

Can you elaborate please...I know there's two colors...what else am I missing? Are these the correct colors?

Looking to refinish my 70 RR Grille - would like to use the correct colors and a good plastic type spray paint. Is there such a thing to do our Plastic Grilles??

Thanks guys...Ill check them out....

Where / who sells the grill screw, plastic fasteners and the lower main grill plastic insert/stabilizers for the 70 Road Runner & GTXs ? I looked at Dantes & Detroit Muscle but didnt see them there. Trying to stay with the smaller vendors - but would go to the bigger box store guys IF I could...

Slowfab...Took a quick look at your project. VERY NICE ! I appreciate your input. I sent you a PM

You HAVE TO USE the PCM , BCM & RF Module and all 5 RF antennas. but Im not using the door modules... that means door locks are old school. But YES to the wireless ignition.

Thanks Gents! FINALLY some guys KNOW exactly what Im doing. YES I have used the entire Drivetrain and all wiring harnesses and Power distribution blocks. The things I have omitted are ABS, ORC, Parktonics, Door modules. Everything else stays. Finally got the car to start - but it wont shut...

That build was almost 10 years ago...2015 I think I saw....ALLOT has changed since then and I'm sure the newer RestoMod builds we see (Like on Mecum) out there have done what I am doing...so there's gotta be other People or companies dealing with what Im looking for.

All the controls and terminations needed to connect the NEWER Cars instrument panel interfaces look like the picture I posted earlier. Tell me whos suggestions you are presenting can connect to this type of interface? because my picture SHOWS the types of computer controlled devices I need to...

You guys are obviously missing the point here. ALL YOUR KITS will not connect to pieces like this