Recent content by Fergie

Also should note that the drum balljoint, steering arms bolted right up to the 5th spindles, no problem!!

Just replaced the drum setup on the front of my 66 charger with spindles and rotors/calipers from a 88 Chrysler 5th ave rear drive. Overall height difference in the spindle was 1/4 inch shorter. I used the same brake hoses, and a dual master cylinder from a 1969 b-body bolted up to my power...

Thanks for the link. Thanks for the link. I read this one before but was just as confused nat the end. I was talking to a mopar man up here and he said I should be o.k. if I use everything off my donar car. Thanks again, Fergie. - - - Updated - - - Thanks for the link. I looked at this on...

Seeking help and information on which Mopar disc setup would fit my 66 charger. I have a 89 5th Ave that I can use if the parts will fit. Anybody have any advice on this? I am going to start the process when the snow leaves. Thanks in advance for your time and help.

Hey; Just joined this site and have a problem. Which Chrysler products have disc brakes that I can retro-fit to my 66 charger. I am looking at changing to front disc with a dual master. I have a 1989 5th ave car I can use, and am wondering if any other members have used anything like this for a...