• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FU64RY's latest activity

  • FU64RY
    FU64RY replied to the thread Took the Plunge EV.
    315 miles so far, good. Had it in a rain storm, the front spoiler deflects the rain barely had to have the wipers on. Just washed it...
  • FU64RY
    FU64RY reacted to 1967coronet's post in the thread MC Bleed with
    Thanks!
    .
    Bad booster will show up as a hard to press pedal with long stopping distance most of the time. Also the car would act like it has a...
  • FU64RY
    FU64RY replied to the thread MC Bleed.
    All done with no good results. Replaced nearly every thing brake related. Rebuilt booster, MC new. All new hard lines front and rear...
  • FU64RY
    FU64RY reacted to Don Frelier's post in the thread MC Bleed with
    Agree
    .
    Uhhh I believe that would be a "firewall bleed".
  • FU64RY
    FU64RY replied to the thread MC Bleed.
    Those are the exact directions that were in the box. Thank You
  • FU64RY
    FU64RY reacted to khryslerkid's post in the thread MC Bleed with
    Thanks!
    .
    Funny because on Dorman's website they have the bench bleeding instructions (pdf) Dorman Products - 88244
  • FU64RY
    FU64RY replied to the thread MC Bleed.
    Thats what the written directions said. Only depress the piston not more than 1 inch. I'll probably bench it and be careful. Waiting...
  • FU64RY
    FU64RY reacted to retractable's post in the thread MC Bleed with
    Thanks!
    .
    I just got a new MC from NAPA that said not to bench bleed . Said it would damage it internal . I bench bled it with no problems . This...
  • FU64RY
    FU64RY replied to the thread MC Bleed.
    Found a Dorman part # M36218 New not rebuilt.
  • FU64RY
    FU64RY reacted to 1967coronet's post in the thread MC Bleed with
    Agree
    .
    If it isn't some high tech polished aluminum thing and looks like a master cyl. I would put it in the vice and bleed it.
  • FU64RY
    FU64RY replied to the thread MC Bleed.
    OEM Rock Auto Plain brown box no co name or phone # on the paper work.
  • FU64RY
    FU64RY posted the thread MC Bleed in General Discussion.
    So here is the delema. New MC directions. This MC must be bench blead. On a red piece of paper included in the package. WARNING DO NOT...
  • FU64RY
    FU64RY replied to the thread Took the Plunge EV.
    Went to an event yesterday, several hundred cars there, a wide variety. A lot of pictures taken of the Charger, Not one person I talked...
Show older items
Back
Top