Geoff 2's latest activity
-
GGeoff 2 replied to the thread Thermoquad in action, video.John, I was not referring to the nozzle hole size, if that is what you are referring to. I was referring to the design/shape of...
-
GGeoff 2 replied to the thread 1961 Long Ram 383 Dart.Up to & including 1961 models used the cast iron TorqueFlite. 1962 was the first year of the 727. The body/chassis/front suspension was...
-
GGeoff 2 replied to the thread Thermoquad in action, video.The CS pump squirter is similar to the squirter used on Carter AVS chrys carbs. Also has the vac break.
-
GGeoff 2 replied to the thread Remember Predator Carburetors?.Like pnora said...
-
GGeoff 2 replied to the thread '66 Hemi Charger rocker arms advice.I would use the stock rockers. They are well made & strong. Spend the $$$ somewhere else.
-
GGeoff 2 replied to the thread Thermoquad in action, video.The reason I braze a cover over the hole is this: it is normally covered over by the choke linkage. Removing the linkage leaves a hole...
-
GGeoff 2 replied to the thread Thermoquad in action, video.Rear door. The small plate that covers the air bleeds is missing. The driver's side one also acts as a stop for the air valve at WOT...
-
GGeoff 2 replied to the thread More AVS/AFB Rod Questions.The Edel rod numbering easy & logical. A 73/47 rod has a 0.073" cruise step & a 0.047" power step. I would rather decipher the Da Vinci...
-
GGeoff 2 replied to the thread Won’t start, won’t crank.I had a Red Optima, still under warranty, fail while I was going down a steep hill. It shorted out internally which killed the ign. Lost...
-
GGeoff 2 replied to the thread More AVS/AFB Rod Questions.Bob sadly passed away last year. Original jetting for 4618 carb is #575 rod. Steps are 065/062/053. Pri jet 0.101", sec jet 0.095"...
-
GGeoff 2 replied to the thread Edelbrock AVS2.The AV is adjustable so that once the air speed is high enough, it causes a depression [ vacuum ] that pulls fuel. The reason the AV is...
-
GGeoff 2 replied to the thread Ebay distributor query..I have used many HEI dists over the last 20+ yrs, all Chinese & no failures.
-
GGeoff 2 replied to the thread Edelbrock AVS2.In my opinion, Edel made a fundamental error designing their AVS carb. They added venturiis to the secondaries, which was good. That...
-
GGeoff 2 replied to the thread Ebay distributor query..Get a HEI dist. Much better ign system, more spark energy, & because of that, you can run 0.060" plug gaps. Road Star in Sydney should...
-
