Recent content by GPA's 66

I have a 66 Charger with a poly block 3on the tree. Have had the Weiand aluminum 4bbl intake, stock 4bbl intake along with the stock 2 bbl intake. Put Tti headers along with a cam I got from Gary Pavlovich it runs real strong. Can’t tell about red light to red light races but it will smoke the...

What or where can I find a Power steering pump for a 318 poly? Converting from a manual to power steering, does a la pump work on a poly block?

Finally getting around to swap out drum for front disk conversion. Besides the easier brake pedal effort is there any other benefits to go from manual to power brakes.

After having some done on the Charger, going figure out the digi taillights. Hooked them up and found that when I push the brakes is when the fuse blows. I was understanding that the brake lights and turn signals were always having power going to them and when they were used the turn signals and...

Ok now not blowing fuses, now I don’t have turn signals. Break lights but no turn signals.

The new tail lights are LED panels from digi tail. I’m using the sockets to get signal for running, turn signals and brake lights from socket pig tail to operate the lights. All the gounds are soldered and heat shrinked.

The new tail lights are LED panels from digi tail. I’m using the sockets to get signal for running, turn signals and brake lights from socket pig tail to operate the lights. All the gounds are soldered and heat shrinked. Playing with it this morning and noticed with lights on turning the turn...

Good day peoples, finally put my digi tails lights in the 66, but now it’s blowing fuses like crazy. Question from the turn signal switch to the tail lights there is not a ground, the bulb socket is the ground to complete the circuit.?? The incandescent lights work but extremely dim. Please...

I had a bad turn signal switch, so I replaced it. Now I have brake and turn signal lights when the running lights are not on, turn on the running lights and no brake or turn signals. what am I missing? This is on a 66 Charger.

My 66 Charger is pops out of 2nd gear when I am slowing down for traffic or just cruising down the road. The trans works fine, clutch is new and is adjusted correctly. I have heard the linkage might need adjusted. Have anyone here had the same issue, and how did you fix it? HELP PLEASE