Recent content by gregpurcell

This is a factory vehicle Certicard & holder from a 67 Belvedere/Satellite. It's in fair to good condition. The holder has one stud missing. You can mount "as is" or use two sided emblem tape. Located in Savannah, GA I need to get $20 shipped (in the US) Thanks for looking!

This is a good used torque shaft (Z bar) for a 70-74 E body or a 71-74 B body with a BIG BLOCK 4 speed. This is the linkage bar that goes from the frame to the bellhousing. The rod from the clutch pedal attaches to one side and the rod to the clutch fork attaches to the other side. This piece...

Thanks for the offer. I'm waiting on a response fron a guy who is interested in a package deal including that rod. If he doesn't want to do the deal, then I'll let you know. Thanks again!

Paypal is good but your inbox is full. PM me for paypal info. Thanks!

I have a set of 4 used upper control arm cam bolts used on 60's-70's A and B bodies and all E bodies. They have been wire wheeled and painted with Cast Blast. The threads are in excellent condition. Located in Savannah, GA I'd like to get $25 plus shipping which will be $8 in the US.

This is a set of lower control arms for a 66-72 B body or a 70-74 E body without the sway bar. They have been sandblasted, wire wheeled and painted and are ready to install. I left the shell of the old rubber bushings in the arms in case you want to use the style of polyurethane bushings that...

I have one used set of lower control arm pivot studs with the correct washers/nuts for a 66-72 B body or a 70-74 E body. The threads are in excellent condition. The studs have been sandblasted, wire wheeled & painted with Cast Blast and are ready to install. Located in Savannah, GA I'd like to...

I have ONE new Magnum 500 wheel center cap with the "Bull's Eye" design used on Mopars. I do not know if it's NOS or repro, but since I don't see a part number, please assume the latter. It has the retainer but one of the screws is missing. Again this is ONE cap that I got in a box of parts...

This is the pushrod that goes from the master cylinder to the brake pedal on a 66-70 B body with manual (non power) brakes. The special bolt is also included. This hard to get piece has been wire wheeled and painted with Cast Blast. Located in Savannah, GA I'd like to get $20 plus shipping ($8...

I'm sorry, ths sold a while back. It's should have been marked sold. Thanks for your interest :)

This is a box of miscellaneous 4 speed transmission shifter rods and arms that I have collected over 30 years of working on 60's-70's Mopars. It has been a lifesaver when you want to modify something and not screw up an expensive set of new rods. Now that I'm retiring, I need to accept the fact...

I have a nice used dealer certicard and two holders. one holder has all the white embossed print still on the envelope. It is missing one mount stud. The second holder has all of the mounting studs but the white print was removed when we cleaned it. The metal card looks pretty nice. See pics...

sale pending

This is a used manual brake reinforcement plate used on 66-72 B body cars without power brakes. This one has been wire wheeled and painted gloss black. There is some minor pitting but overall it looks very good! Located in Savannah, GA I'd like to get $35 shipped. Thanks for looking!

This is the brake pedal pushrod and bolt that connects the brake pedal to the master cylinder on 67-72 B body cars with manual (no power) brakes. It has been wire wheeled and painted. The bolt and the rubber boot are included. Located in Savannah,GA I'd like to get $35 shipped. Thanks for looking!