• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by hjelmsd

  1. H

    Low line pressure in reverse - causes

    My diagnosis continues. My rear band is loose. Loose to the extent that could not adjust it to spec. I removed the servo arm/pivot so that I can inspect the band while installed and transmission is in the car. I am able to use large jaw pliers to pinch the band closed so each end touched...
  2. H

    Low line pressure in reverse - causes

    Thanks. Good reminder that low level causes low pressure. I am certain that it's full. I am not aware of any reason that the pressure would change with any band adjustment.
  3. H

    Low line pressure in reverse - causes

    My 727 has had a slipping reverse gear for some time. I finally started diagnostics. I get only 180-190 psi when checking the reverse servo line pressure. Service manual indicated 240-270 psi. So I have low pressure, which I assume is consistent with my reverse problem. I also checked the...
  4. H

    So It Begins, 1966 Charger Restification.

    So very familiar! Every single photo. Great work. I think silver looks great on these cars.
  5. H

    Comment by 'hjelmsd' in item '1967 Dodge Charger'

    https://www.forbbodiesonly.com/moparforum/threads/driveshaft-length-chart.109307/ Seems like a want ad post here on the forum would drum up something.
    • hjelmsd
    • Showcase comment
  6. H

    Comment by 'hjelmsd' in item '1967 Dodge Charger'

    Thanks! I had Mark at the gauge doc rebuild the instrument cluster, and ensure the electro luminescent lighting worked. I did the gauge polishing and cleaning. All factory EL setup, with the new bosch (I think) relays.
    • hjelmsd
    • Showcase comment
  7. H

    Comment by 'hjelmsd' in item '1967 Dodge Charger'

    Thanks for the interest. Yes, steer and gear in Ohio sent me a rebuilt box, then I sent them back my core. Works well. If I had to redo it, I'd go even firmer with the feel. Think I went 1 notch firmer than stock, but might go to firmest option.
    • hjelmsd
    • Showcase comment
  8. 1967 Dodge Charger

    1967 Dodge Charger

    Purchased in September 2015. Mostly complete in August 2020. Full tear down, every nut, bolt, piston, clip - amateur restoration. 383 727 Torque flight Non matching numbers 8 3/4 3.23 limited slip Power steering (rebuilt by steer and gear), power brakes. Original A/C car Yes, the hideaway...
  9. H

    SOLD 66-67 Dodge Charger/Coronet Left Front Fender

    Thanks, another good option to drive up in VT. Scott
  10. H

    SOLD 66-67 Dodge Charger/Coronet Left Front Fender

    Thanks folks for responding and the help. Mine is damaged in the fwd area, up high in the fender. Some of the denting is into the area that is closed off from the headlight bucket/core support features. I got a response from the 66-67 charger forum from a guy in Connecticut, so i will look...
  11. H

    SOLD 66-67 Dodge Charger/Coronet Left Front Fender

    Looking for 66-67 Dodge Charger/Coronet left front fender. Mine is rust free, but damaged from accident. Looking for something in very good condition. I am located in Connecticut, willing to travel from new Jersey to part of Maine for pickup. Will consider shipping, but not certain how safe...
  12. H

    Temperature control valve capillary well?

    Okay, thanks for responding. These comments are helpful. I found this other thread that shows the capillary tube parts that goes into the heater box, and also the attaching valve. http://www.forbbodiesonly.com/moparforum/threads/67-belvedere-with-factory-ac.79579/ I rechecked my service...
  13. H

    Temperature control valve capillary well?

    Hi folks, Can anyone tell me what goes in this square hole (2 screw holes)? My 67 charger manual states that this is a temperature control valve capillary well. But does not show images or describe any part. I am rebuilding my heater box (with AC) and all of my teardown photos show that I...
  14. H

    SOLD 66-70 Quarter window track guide

    Thanks everyone for helping me out. I have found my parts, pending shipment now. Consider this thread closed.
  15. H

    SOLD 66-70 Quarter window track guide

    Hi Folks, Looking for 2 66-70 style track guides for my quarter windows. Pictures are in these other posts for reference: http://www.forbbodiesonly.com/moparforum/threads/66-charger-quarter-window-track-guide.75673/...
See more
Back
Top