Recent content by Holtzer1

The plastic bezel is trashed, not the steel.

71 RR, someone decided to take a hacksaw to the ralley dash in order to fit a single din radio in the factory location. It's butchered beyond belief. I'm going to replace the bezel with one I found online that holds 2 big gauges and 4 smaller ones, no radio mount location. There's no center...

Front torsion bars, front valance?

In decent condition. Don't have to be perfect, but repairable for someone with limited body work skills Located in 65041 MO

DO NOT PUT CHROME IN AN ELECTROLYSIS TANK!!!!!! It creates what the epa likes to call a haz mat super site. Bad bad chemicals are left behind, and it will destroy the chrome

Spent a lot of time straightening this fender. Finally got it where I believe it should be. I'll fit it tomorrow, if everything lines up as it should, comes back off and gets epoxy primer. Then on to the other side

Sassy grass is the original color.

I'm located in missouri, willing to drive a couple hours for the right deal. Thanks

This was his starting canvas

Grinding down his ugly welds. Lol. I'll go back while he's at school and fill his burn through and touch everything up. Only way to learn is to grab the welder and do it I told him.

Inner removed, everything stripped, rust treated with ospho and primed

Fixed, and a nice shot of the rotted inner fender

Rail repaired, coated with por15 We all know what the other pic is

Surprise frame rot, cut the bad out, patched those sections, capped the entire rail with 14g and full length welded My oldest son welding in some new sheet metal

440 and trans pulled