• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Hottboy Custom

00o0o_aMuAdQYn0jL_600x450.jpg






















1965 Dodge Coronet 440

cylinders: 8 cylinders
drive: rwd
fuel: gas
title status: clean
transmission: other

CUSTOM BUILDER TO CELEBRITIES
$50,000 or Trade for clean Dodge Viper. PARTIAL TRADES W/CASH CONSIDERED.
My name is BJ. I own HOTTBOY CUSTOM CREATIONS and We are just finishing a complete frame off Custom build of a 1965 Dodge Coronet 440 Pro-Street Hot Rod that actually has the 440 in it. Entire engine has been custom designed and custom built bulletproofed with all new gaskets and seals. Lots of chrome. All original Mopar body badges like new. This Hot Rod Sits on a Custom built 2"x 2" square tube frame and has New K-frame. Has all New suspension front and rear with New air ride system. New floor And trunk panels from rear bumper to front firewall. The 440 motor has ported iron slave heads, Mopar Valve Covers, a bitt larger than 0.60 over cylinder Bore at 4.475, light weight custom forged aluminum alloy flat top pistons, Custom forged ball point rods, dual plane Aluminum Mopar M-1 intake, Quickfuel Technologies Q-Series 850-AN double pump blower Carb with Forced Air induction, has the fuel pressure guage in the dual feed line, electric Gasket man fuel pump backs up the high volume high performance mechanical fuel pump and custom Designed fuel regulator designed and built by us here at HOTTBOY CUSTOM CREATIONS, Ready-to-Run Coil and Distributor package with vacuum advance and mechanical advance designed and built by ASSAULT RACING AND KMJ PERFORMANCE, forged Cam, large forged Crank with 4.500 stroke, Custom HCC deep well oil pan, Hedman Headers, matched with the 727 Totqueflite three speed trans, with shift kit installed, 4200 flash/ 3800 stall Converter, new flex plate, TCI Pistol Grip Street Fighter slap shifter, 8.3/4 Dana Posi rear end is mini tubbed and it is street legal. Has thin Aluminum Weld Racing wheels on front with Mickey Thompson rubber, 56 Series Aluminum Weld Racing wheels and wide rubber on rear. Interior seats front and rear are immaculate, door panels are immaculate. Dash is immaculate. All glass original and like new. Has original guages and have the aftermarket oil pressure guages, temp guages and Tachs. All chrome inside and out is original and like new. The entire body has been gone over and made flawless all steele and no body filler. Absolutely no nicks, dents or rust. New aftermarket fuel tank installed. It's ready for paint and will roll out of my shop when purchased. Not until then. Too many projects to complete with not enough time so my loss is your gain. Im Selling it for $50,000 But, Value appraised at upwards of $60,000.00 to $80,000.00 You pay and You drive it home. I Have clean green Title in hand. I Can text new pics. No help needed selling. Low ballers and unreasonable offers will be ignored. No tire kickers. I May consider partial trades with minimum of $20,000 cash included. But use common sense. No junk wanted. Text 517-936-1993 any time after 1:00p.m. until 2a.m. email 24/7 Do NOT contact me for other services or third party sales offers.
Location
Southwest Detroit, Michigan
What Mopar do you own?
Dodge
Gender
Male
Occupation
Federal Certified Engineer/ Custom Car Designer
Back
Top