• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

icetech's latest activity

  • icetech
    icetech replied to the thread Deciphering Driveline Angles.
    Nice, i ended up doing 5* (shoulda went 3-4) and it made a huge difference.. only did one quick run around the neighborhood last weekend...
  • icetech
    icetech reacted to Charlie Brown's post in the thread Deciphering Driveline Angles with
    Like
    .
    I installed the 2.5 degree shims and it seems to have made a difference. Next week I'll be past the recommended break in period and then...
  • icetech
    icetech replied to the thread Silicone Brake Fluid.
    took 5 seconds to find... DOT 5 brake fluid is not used with ABS (Anti-lock Braking System) equipped vehicles primarily because it's...
  • icetech
    icetech replied to the thread Silicone Brake Fluid.
    Yeah.. the stuff is stupid expensive and i have gone through a lot of it trying to get my brakes working properly... hate wasting money...
  • icetech
    icetech reacted to Kern Dog's post in the thread Silicone Brake Fluid with
    Like
    .
    Switching to DOT 5 makes sense if you are trying to protect your paint from spills. You sure pay for it though....the stuff I've used...
  • icetech
    icetech reacted to Nxcoupe's post in the thread Silicone Brake Fluid with
    Like
    .
    That is correct, they do not mix. Dot 5 also does not work with abs. I just replaced everything on my 66 Coronet, stainless lines...
  • icetech
    icetech replied to the thread Silicone Brake Fluid.
    I used all Dot5 also.. lost it's purple fast but it's nice to not destroy paint.. and i got tons of it in my engine bay (pressure...
  • icetech
    icetech reacted to Cockroach's post in the thread Silicone Brake Fluid with
    Like
    .
    As the original owner of a 68 Roadrunner, and reading many posts over the years......some very accurate, some not so much, I decided to...
  • icetech
    icetech replied to the thread 360 oil pan?.
    yup... will work fine
  • icetech
    icetech reacted to RemCharger's post in the thread 360 oil pan? with
    Like
    .
    I would use the factory cup washer and eccentric, if it was an LA style cam. But if it's a Magnum cam without eccentric mount, use...
  • icetech
    icetech replied to the thread 360 oil pan?.
    It's ok.. it's how we learn stuff.... you REALLY should get a "how to build small block mopars" book though.. they help a ton
  • icetech
    icetech replied to the thread 360 oil pan?.
    close enough
  • icetech
    icetech replied to the thread 360 oil pan?.
    No.. there is a key in the end of the cam (at least there should be) that the gear slides onto, that is what keeps the gear in place...
  • icetech
    icetech replied to the thread 360 oil pan?.
    Put the eccentric and there is a upside down cup that goes on also... just so the bolts sits properly and all that
    • 1752516811329.jpeg
  • icetech
    icetech reacted to Cranky's post in the thread 360 oil pan? with
    Like
    .
    My first one was in the 70's and is the only one I've ever done. My girlfriend's dad helped me with it and it was fine from the get go...
Show older items
Back
Top