• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

INTMD8's latest activity

  • INTMD8
    INTMD8 replied to the thread Tire spin.
    Thanks guys! BSB67, your car is awesome as well. If you put headers on that thing I'd have to run for my life.
  • INTMD8
    INTMD8 replied to the thread Tire spin.
    Not crazy fast but a fun street car.
    • IMG_3552.jpg
    • IMG_3551.jpg
  • INTMD8
    INTMD8 reacted to dvw's post in the thread Tire spin with
    Like
    .
    We race Cal tracs and radials. First off with the correct shocks a S/S spring will hook you combo. S/S springs are incorrrect for use...
  • INTMD8
    INTMD8 replied to the thread Tire spin.
    How old are the tires, what pressure and sufficient burnout? I got a 1.619 60ft with road race tires, manual trans, 4.56 gears and ss...
  • INTMD8
    INTMD8 reacted to rmchrgr's post in the thread AFR install with
    Like
    .
    Again, before doing anything else or spending another dime, ensure the engine is in good condition. Maybe do a compression or leak down...
  • INTMD8
    INTMD8 reacted to steve340's post in the thread AFR install with
    Agree
    .
    Any exhaust leaks can throw off the AFR readings. Fix any leaks first.
  • INTMD8
    INTMD8 reacted to 496 polara's post in the thread AFR install with
    Agree
    .
    If that is the case then stick it in the lean side to monitor first. You can always install bungs in both exhaust pipes and switch the...
  • INTMD8
    INTMD8 replied to the thread Lunati Hemi cams advice.
    If you don't want to rev it why not stick with a stock cam? I would think even stock 6000-6500 would work great. I have a comp cams...
  • INTMD8
    :thumbsup: Turns out uncomplicated is better.
  • INTMD8
    INTMD8 reacted to Krooser's post in the thread Stock exhaust manifolds to head gasket with
    Agree
    .
    We use hi- temp silicone on 800+ hp dirt track cars with zero failures. Yes I was a doubter to until I saw it with my own eyes.
  • INTMD8
    I use no gasket. Clean with lacquer thinner and a very thin smear of rtv. (I like Toyota fipg). I did this on my hemi years ago with...
  • INTMD8
    INTMD8 reacted to 1 Wild R/T's post in the thread Stock exhaust manifolds to head gasket with
    Agree
    .
    Manifold to head, that little bit of pitting... No gasket....
  • INTMD8
    INTMD8 reacted to Richard Cranium's post in the thread The Roach with
    Like
    .
    Gave the car a wash today to clean off 5 months worth of dust and finally get the blue protective covering off of the tires...
Back
Top