• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by IT'S DYNAMITE

  1. IT'S DYNAMITE

    Have a quick second? Changing the rear main seal as we speak, have questions. ***UPDATE***

    THe marks that you see on the crankshaft are "knurl" marks because the original seal going back many years was rope that was installed and formed into place with a Chrysler tool. In about 67 or so they came out with the neoprene replacement which made it so much easier to installed and remove ...
  2. IT'S DYNAMITE

    What does RB stand for on a 440?

    You have to also remember that in 1960 and 1961 there was a 361 raised block used in the Chrysler line of large body cars that were "raised block" and had crankshafts that were about 1" longer due to the cast iron torqueflite trans until 1962 when the aluminum torqueflite was introduce and the...
  3. IT'S DYNAMITE

    Your thoughts on this 1970 V Code Super Bee for sale?

    I have restored 8 of the 15 cars that I had at one time and learned 40 years ago that you do it for the love of the particular car and model and not from the viewpoint of what you can get for it. I usually don't sell from my collection and have ended up buying back cars that I parted with. It's...
  4. IT'S DYNAMITE

    Ever Wondered What Paperwork The Dealer Kept For Your Road Runner?

    I think what you are doing is great for all the Mopar owners. Perhaps you can point me in the right direction. I purchased through a friend, Edith Sanders, a ,new 1963 Dodge 330 4 door sedan with the 413 Max Wedge 415HP motor and a T85 3 speed. Black Red interior radio ,variable wipers,391sure...
  5. IT'S DYNAMITE

    auto trans temperature too high!!

    I agree with MCODECUDA. The sensor should be in the pan .I never checked the temp in my street hemi but I seem to remember that the converter in my '64 Plymouth 426 max runs around 180 to 200 with a 6500 stall converter. I think a converter from Rick Allison at A&A trans would be a reasonable...
  6. IT'S DYNAMITE

    Bumper Question: Re-chrome or purchase new

    I use Cambridge Custom Chrome in Ontario. I ship to the Buffalo address and the work is done in Ontario. I have had all the Chrome on all of my 9 cars done their, not just bumpers and it is expensive but there work is perfection Call Valerie and talk to her about you needs Phone #1 519 658 6681-...
  7. IT'S DYNAMITE

    426 Max Wedge questions

    There is no difference on the flywheel hub mount on any of the 361 to 440 crabks. The heni is an 8 bolt crank but still the same hub size. Maybe there was a problem with the engine at one time and the crank was replaced with a 440 cast crank. that will set up a vibration if it does not have the...
  8. IT'S DYNAMITE

    Proof nobody pays much attention to avatar pics around here...

    Hi, I have been absent from the forums for the past 4 weeks and saw you post today. I had to sit here and think about what you stated. It happened to me 5 times in my life 2 times it was girls in high school that I put on a pedestal and not until one of my close friends told me what they both...
  9. IT'S DYNAMITE

    572 HEMI Cross Ram w/2 -770 Holleys - open to suggestions for intake change

    Hi, I saw the ad. You don't say if you are looking for a magnesium or MP. I have a new never used aluminum cross ram with a set of adapter plates that coes between the intake and carbs,This is from Chrysler development it has the 2 removable top plates for interior work or to reposition the...
  10. IT'S DYNAMITE

    Mystery crank?

    It appears to be a crank for the 413 1960-1961 .In that application the studs are in the converter hub and the holes in the end of the crank are offset so the balance is correct. On the early set up even the 331-354-392 all had converters that bolted to the crank and the cast iron torquelfite...
  11. IT'S DYNAMITE

    Line lock- on rear brakes?

    idjr88f89fwjiVPJHPis C
  12. IT'S DYNAMITE

    Line lock- on rear brakes?

    I agree with 33IMP,and then he might want to see if he can put one on the spare alsoL, OL
  13. IT'S DYNAMITE

    Line lock- on rear brakes?

    Does he plan on backing up to the pre-stage/stage bulbs and then launch it that way? This I have gotta see.!! (assuming this is a rear wheel drive car?)
  14. IT'S DYNAMITE

    Early 727 filter

    Being 80 years old I was in my early years before working for Chrysler and as a tech on a one year service we would change the in-line filter. I always turned them inlet side down but never found any dirt as the flat filter in the pan caught it all. I was on the Chrysler Racing support program...
  15. IT'S DYNAMITE

    Blown tranny now. Honestly, what next?

    Hi Mark, This has nothing to do with what happened to your trans,but when I look at you breakdown of engine build and I see that you used all the good parts I am surprised that you used your cast crank! I am an engine builder ASE Certified Master Machinist owning my own shop and I never did a...
Back
Top