Recent content by Jc cooper

Think Cranky was on a paid vacation, in Southeast Asia about that time, if I’m not mistaken! My Buddy!

Correction Shirley Shahan for the win !

Cranky, I know you remember the Dickinson Drag race Days and the Super Stock elimination Races!

This old Gtx , had an extensive street racing history, but it’s highlighted event , was a four day super stock eliminator meet , at the old Dickinson Drag Strip in Dickinson Tx , put on by KiLT radio ! We went there , with the car ready to rumble. With it’s custom home built 440 , with Crower...

Who knows about my Dark green 67 Plymouth GTX hardtop, 440 auto , that I sold around 1970 to aFellar in the Deer Park , Pasadena Tx , area ! I was a kid about 20 with an exceptant wife ! That had been set up for drag racing! Would love to know what happened to it! JC , please contact me if...

Imported garbage, poor example of the original

Having been a professional Welder for many years , decades ! And a fabricator, with a nation wide Local Union 798 , out of Tulsa ,OK . , that a multitude of Hands could have fit those wheels up , precisely! An then welded them up , Correctly!

But not on the drivers , it remains available, so when wife gets cold just add atouch of out side air , !

Having been working only automotive electrical most of my life, most electrical problems, are ground related! Grounds carry a very substantial amount of current, when under load ! Be specific with your diagnosis, orderly! Ck your replacement starter ! Remove and bench test ! Look at the cable...

Thanks for your reply and info !

Anyone have an accurate part number aftermarket, for the oil pressure switch, with the extra circuit for electric choke, hook up , Thanks in advance, JC

One quick question , when talking about pinion angle, are we talking about the gear end or the flange end of the pinion?

In response to your question, as others have said, M and H under the dash and Evans under the hood! Pretty easy To do , because most all harness plugs only fit one place ! Good luck, don’t get frustrated, take your time, it’s very doable!

Easy way to ck for vacuum leak is by either placing hand over the primary portion of carb when running,or slightly close the choke, if vacuum leak, it will speed up ! Good luck

Got it , thanks