Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Welp...this is a bummer..
Like life, timing is everything. I recently got an opportunity overseas that I am unable to turn down. This means I have to let go of this beautiful car that I recently purchased. I had big plans for this car but shes got to go. I don't have my parking here in San...
Yup, im probably going to order a new edelbrock intake manifold, gasket,phenolic spacer from summit, and use my edelbrock 1406 correctly. Slap it all on and flush the coolant one weekend. Just ordering the parts and finding the time now
Im looking at the edelbrock 7576, 2126 and 7577
Have...
I'm doubtful that I'll be able to add another 1/2 inch on top of the aluminum adapter. There is already a imprint of the air cleaner on the hood insulation.
As far as the thermoquad, what model did this come off of? Is this better...or worse than factory?
I apologize for my ignorance, this is...
I put in a clear wix fuel filter and moved it off the rocker cover. It was never touching earlier, just looked like it was in the photo but its 2-3 inches away now.
Yes i believe I have the factory intake manifold, which is two openings vs edelbrock four hole. I will take photos of everything...
Do you guys have a recommendation on which spacer to use that will fit the 318 and edelbrock 1406?
im seeing heat insulators, wood, and phenoloic,
Airhorn gasket is what I need if im going to take the top off the carb to check the float correct?
Do you guys have the size off the top of your head?
I found a freeze plug kit for the 318 on summit but doesnt include the head freeze plugs, the ones i need
Hello guys!
Just picked up a 68 Coronet. Shes a four door with the factory 318. She drives nice and straight. Besides some issues like http://www.forbbodiesonly.com/moparforum/threads/cure-my-hotstart-issue-318-edelbrock-1406.143223/
and...
Hello,
I just picked up a new to me 68 coronet with it's factory 318. She runs great but it's experiencing a hot start issue. The car turns over strong when cold, or even when its warm but I have to turn the car back on within a few mins or so. If I try to start the engine after 30mins-1 hr, it...
Hello,
Just picked up a new to me 68 Coronet. She runs great, been sitting for a while, and after the drive home, I noticed a coolant leak. While working on cars and motorcycles are not new to me, but id like to ask the 318 gurus here before I dive in.
Seems like its leaking from this bolt? is...