Recent content by kenicb

Hey Joe, sorry I just saw this. The kit i got from classic industries. its apx 600.00 There are a few things you need beside just the basic air box kit you buy from classic industries. additionally you will need 1) the seal that goes between the air box and the metal of the hood. apx 20.00...

Can ya'll help me please with the install for the air duct work? 1970 coronet N 96 aftermarket 3 piece kit from classic industries. there are no assembly instructions. So i need some help. questions- Do you assemble all three pieces before attaching to the hood? Do you have to use...

well keep your head down, stay alert...stay alive and all that! hit me back when you're home. Godspeed Keni www.kenithomas.com

Looking for the 150mph sweep style speedometer. Just the speedometer face plate would be fine and it can be non working. thanks so much Godbless Keni

sent ya a pm about the ram charger duct work

looking for 150mph sweep style speedometer for 68-70 coronet

are you talking about an adapter for the carb to intake like this? http://www.summitracing.com/parts/edl-2691?seid=srese1&gclid=CJnwwZegpbgCFStk7AodFGoAzw or is the intake not fitting to the slant six?

On the 70 super bee with dual hood scoops, the cut outs in the hood are rectangular in shape. Did the cutouts come from the factory with a rubber grommet/baffle like the round holes did on the A bodies? thanks so much God Bless Keni

thank you Bill. you are correct. I uploaded the wrong pictures. PASSENGER SIDE IS SOLD. DRIVER's SIDE STILL AVAILABLE AS PICTURED.

1971 Dodge Charger tail light assembly left side 225.00 plus shipping very good shape. everything works. came out of a 71 charger located in Nashville, TN shipping charges will be actual cost to your location Thank you and God Bless Keni

hey Mike, do the instruments work on the nicer one? If so, I'll take em thanks Godspeed Keni

here's the update. I replaced the alternator and Voltage regulator. Then pulled the instrument panel out and found the problem for the ammeter. The wires were loose. I bypassed the ammeter as it was pretty crispy at the connections from something that must have shorted long ago. Installed...

I would like to buy this from you Bear. And I have a single barrel carb and manifold i can send you too. Sent you a PM. thanks so much Keni

Hey Bear, I'll take the intake and the carb for 300.00 I just pulled the one barrel set up w choke off my 71 slant. It had a holly 1920 but not for 67 specific. Let me know if that interests you at all. If not I'd still like the intake and carb. Thanks God Bless Keni

thanks so much for responding. I was checking the gauges with a 9 volt to see if they still worked. The temp and fuel both moved when I grounded them. So i think what you told me is a good suggestion. Where do I connect a ground to the PC panel? Thanks again Keni