Recent content by KingCapt

Hood is still available in York, PA.

Bump

FWIW: I also have full body trim, and passenger side fender, and some other stuff that might make the trip worthwhile.

$400 OBO. Hood is unmolested and in very nice condition. Will also fit '66. Local pick-up preferred. York, PA area.

I have a nice ‘67 hood, Satellite. York, PA

Thanks for the input guys. I went w/Taylor Driveline Specialties in Spring Grove, Pa. Turns out my brand new TCI Breakaway self-destructed due to needle bearing failure, sending metal bits throughout the trans, cooler, etc. Ugly mess of things. Replaced the converter w/FTC custom 3000 stall and...

600 ft lbs @4900, 610 HP @ 5500. Kick-down linkage connected and operational. Full throttle, the trans arm is all the way back. (I double checked it.) I did find it odd when dumping it @ 40-45mph+, it never seems to drop down into 2nd… and stayed in drive(3rd). Thought it should drop down when...

Need recommendations for shop that specializes in Mopar 727's w/excellent reputation. I am in southern York PA area. Background: TCI Streetfighter transmission with <15,000 miles. I believe it's toasted. Trans developed occasional slight delay/soft shifts over brief period, 2 drives and 75-100...

Price drop: $350

Fully refurbished w/non-stick kit, factory jetting, 50 cc accelerator pumps. Chrome plated fuel rail (used) included in sale. Background: Carb purchased @ Chryslers Carlisle last summer from reputable carb resellers. Needed bigger carb for new motor. $375 + shipping. Located in Red Lion, PA 17356

No problem. They aren't anything fancy, just original to a '67 and 55+ years old. The bezels on this year are really intricate and cool.

Yo Joe- $300/pair including OEM bezels and lens. I also have complete body trim for '67 Satty if interested.

I have complete set for ‘67, lens and bezels.

‘78 400 B Motor (#4006530) w/#452 heads, Mopar Purple 484 Hydraulic, Eddy Performer intake/Eddy#1411 4Barrel (750cfm) w/electric choke. #1411 tuning kit included. Motor was assembled/dropped in >15,000 miles. Compression @ 140-150psi (cold) all cylinders. Oil pressure is 20psi (idle), 70-80psi...

They don't look bad to me...