Recent content by Kobrak

Ends up I went to pull the trigger and shipping was just over 20 bucks?!?! Guess I will just wait until I find something on fleebay or whatever..........jees man.

So I finally got the thing fired up yesterday and now it is time to get everything buttoned up. I am missing a few plug wire holder doohickys and I am wondering if the enclosed pic is the proper one to get from classic industries? MN2224 is the part # that contains the connectors/fasteners...

Not sure if it appropriate to bring up an old thread or not, but here goes! I am finally back on getting spark to the dizzy and although this is supposed to be simple I need a bit more input here. I was reviewing this topic and I just now saw that becuase I am running the MSD RTR I would more...

I do still have the old one to answer that question, enclosed is a pic of the back side of it. All the guts ran out of it down the firewall.

I do have the old one, but all the guts came out of it and ran down the firewall. Car has no spark, but I have yet to really dig in the troubleshoot the issue. I’ll keep the old one and install the new one as a shotgun approach. If still no spark, I’ll start tow ts it.

So what happens to the light blue/yellow wire that is in the 5 pin?

I was looking online for a new ignition module. When I fill out my car info on several parts sites, it says it will not fit my car when I select what I believe is the correct module. Mine is a 5 pin module(see pic), but the sites seem to think it should be a 4 pin module? Any input would be...

Vaanth, thanks for this. The car does have the tilt column! Another mystery solved on this car. Thanks again!

72RR, I was able to have another look yesterday and I confirmed the tach wire (Gray White) is in place. The wire in question is definitely Black/White.

Thanks much, I'm hoping to get back out in the shop to have a look tonight!

I was able to have a look at the heater/AC control unit tonight and I do see a black/white strip connected. So, that black/white remains a mystery!

I was so focused on the wiper switch I didn't even look at the heater control! I'll get a chance to have a look maybe later today. Thanks a ton Nacho-RT74 for the help.

pnora, doesn't show it. It does show the same wire (black/white strip) for the light switch. but I don't see anything for the wiper switch.

Enclosed is a picture of the wire. It seems to be a ground and it is in the harness that contains the wires for the windshield wiper switch. I don’t see anywhere on the switch that looks like a tab broke off, but who knows?!

Got you! Thanks!