Recent content by ky509

Seriously you need to find out all you can about that shaft before even thinking about using it. There is a reason for camshafts being called the brain of the engine and not all cam`s are alike. Before choosing a cam you have a lot of things to consider in making absolutely sure it will work...

Loosen the rear band a little and it`ll probably start working like it should. Common sense tells you that if it worked properly before the adjustment it should work properly if you put it back where it belongs. Jmtc

Emblems are like the side marker lights on the superbee, they all suck and take away from the beautiful lines of the car. Personally I had all emblems and side marker lights removed from my Superbee. It now has much cleaner lines and does not look like a 18 wheeler coming down the road with all...

69 Bee`s prices for machine work are very reasonable. Because his prices may be lower than machine shops in some one else`s area does not mean he is in jeopardy of going out of business. The cost of living may just be a lot lower in his area than yours. His machining techniques may just be...

FOR SALE 1969 Dodge Superbee Muscle Car Clear title Numbers matching except for the engine and some sheet metal. All work is professionally done So far it has been on the rotisserie where the frame was tied and the bottom was repaired sealed and painted with a heavy duty sealer. The...

Ok now that you have confirmed the vacuum lines are all good (no leaks) The nect thing to check is the power valve in the carburetor; that is unless you have removed it and plugged the hole. On a holley behind the front float bowl in the plate that holds the jets at the bottom is a part called...

This car has been SOLD

The accellerator pump has nothing to do with the idle circuit of a carburetor therefore messing with it is a waste of time. The function of the accellerator pump is to give the engine a big gulp of fuel when you initally mash down on the gas pedal. Without the pump the engine would stumble and...

That was totally awesome. Thank you for posting it.

Here is what I would do First I would lay out to them what I was planning and needing done in detail. Then I woukld ask them to make me an offer that incluided some of what I was needing. They will come in some what low ball but you them bump up what you need to a reasonable level. I...

If you have the car stored near an open field or out in farm country the little mice love to chew the vacuum lines into. They after dining on the vacuum lines then have desert at your plug wires. The quickest way to diagnois a problem is to always keep two tools in you tool box. One is a...

Personally I hate those chrysler side marker lights. Makes the cars look like 18 wheelers. One of the worst things mopar ever done to the bodys. But more than likely it had something to do with insurance regulations. Who knows the reason why but I can tell you that a piece of .22ga sheet metal...

Thank you for the re-sizer addy. I to have always love the 69. It took me nearly ten years to find this car. I was extreemly picky when looking for the car I wanted to restore and built so I didn`t want anything from the northern part of the country due to the rust issues and that limited my...

Here is one of the back of the car after we got the suspension back under it and finished painting the jams and fire wall.

This is what it looked like before we started the restoration. It is a 4 speed car and still has it`s numbers matching transmission. - - - Updated - - - The above photo is what it looked like the day I bought it and brought it home. Right now it`s in pieces all but the under carriage...