Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Ok picked up a standard voltage regulator with a new pig tail. Grounded the regulator hooked up the blue to blue and tge green to green. Still no charging. I hooked up battery voltage to green wire and I get 15 bolts running like you said. So what am I missing here ? I did a continuity test on...
Bad picture they are not connected together. 2 blues go to the red wire and the green goes to the stud. So now what. Where should I have power and when. Do I run continuity tests. New idea. That is a factory high performance voltage regulator that comes blue and someone painted it black.
68 383 with electronic voltage electronic ignition instead of points. Hi performance factory voltage regulator. Not charging. I have power and ground to the regulator. Removed green ground eire from regulator and grounded it. Still not charging. I have power at the alternator and I am assuming...
I am ordering a bendix brake booster from cass for disc brakes. He’s got a new style one that you don’t have to hack up the bracket and firewall to install. $250 plus shipping
I have not seen that diagram before. The one I have is the opposite on the master cylinder to the proportioning valve. I have those 2 opposite. I been emailing with cass at dr diff he said I would use the valve I have and not use the extra small brass block ? Also the diagram he sent me is the...
Hello all. 68 coronet 500 was a power drum car that I am converting to a power disc front car drum rear. I have everything installed but I still can’t get this thing to stop or get a higher brake pedal. Right stiff disc brake kit using my pier drum 8 inch booster with a 73 duster proportioning...
I am really confused so need some help. I want to put 15 magnum 500 wheels on my 68 coronet. I found an eccentric pkg deal but the front rims are 15x7 4.25 back spacing is that going to work. Rears are 15x8 4.5 back spacing. I am going to put a set of 255/69/15 tires I have on them. Is that...