• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by Max Stryker

  1. M

    WTB 1971-1971 B Body

    Hey guys, I'm looking to find a 71-72 driving (or close to it) project car. I'm not dead set on those years, but that's my preference. I've been searching around for a decent car that's somewhat close to arkansas, but it can be difficult. If it helps I have a lot of parts that I can trade to...
  2. M

    FOR SALE Blocks/Parts for RB/B/SB: Lots of stuff

    I have several parts available that I'll list below. As usual ALL prices Negotiable 4 sets of Big Block (8 heads) 2 sets (4) 906 heads $300/set obo 1 set (2) cast #4006452 $150/set obo 1 set (2) cast#3769802 $200/set obo 1 68-72 440 RB $500/obo 3 440 steel cranks $150/piece obo #4027175...
  3. M

    SOLD Mopar items including aluminum intake, center chunk, cam, and starter

    All parts have been sold
  4. M

    SOLD Mopar Parts: Center Chunk, Starter, Cam, Intake, Glasspacks

    All parts have been sold
  5. M

    FOR TRADE Various Big Block Parts and Center Chunk

    All parts have been sold
  6. M

    FOR SALE MOPAR Parts/Big Block Parts

    All parts have been sold
  7. M

    FOR SALE MOPAR Parts/Big Block Parts

    Hey guys, I have a few different big block parts available. I just need to get rid of them at this point so the prices I'm listing are only a starting point. Feel free to PM me with any questions or offers. I won't be checking this thread regularly though, so the best way to get a hold of me...
  8. M

    FOR TRADE Various Big Block Parts and Center Chunk

    741 case. $550 chunk. 150 intake. 100 cam. 70 starter. glasspacks free. PM me with any questions.
  9. M

    FOR TRADE Various Big Block Parts and Center Chunk

    I'm trying to get $900 out of all the parts, but I will take offers for some or all of the parts. Prices are negotiable. Center chunk is an 8 3/4 with 3.91 posi (it came off a 72 Charger BB car) Also, I will probably have some motors and 70 Dart parts available soon. If interested please pm me.
  10. M

    Need more air

    Thanks guys, I found the ultra low profile spectre that I think will work. Should barely fit, but is a lot cheaper than a new hood and air intake.
  11. M

    Need more air

    I have a 71 Satellite Sebring Plus. I've completely built the 383, as well as the rest of the car, including a high rise intake. The problem is that I don't have enough hood clearance to run a proper air cleaner, but the Holley sitting on top really needs some kick *** airflow anyway. I'm either...
  12. M

    SOLD Mopar Parts: Center Chunk, Starter, Cam, Intake, Glasspacks

    Update: The camshaft listed is not a Comp. It's an Erson cam with .472 lift and 306/306
  13. M

    Problem: 383 idle's rough and tries to die after running for 20-30 minutes

    Yes, a product engineering regulator. Seems like a valve issue in the carb. Also, been told the regulator is improperly (it's alongside and underneath the carb bolted to a plate on the valve cover). In addition, it seems that pressure can build up in those lines and drip a little gas from the...
  14. M

    Problem: 383 idle's rough and tries to die after running for 20-30 minutes

    Update: I had a buddy help me check some things. Noticed that the problem occurred almost right away (before the motor was really hot). Also, once the problem occurred hopped out and noticed that the fuel pressure was up to 13 1/2 psi at idle. I'd say that engine bay heat is an issue, but I...
  15. M

    Problem: 383 idle's rough and tries to die after running for 20-30 minutes

    I have a Products Engineering Electric Pump and a fuel sump welded into the gas tank. I do have a fuel pressure gauge and it has been sitting at 6 psi consistently. I'll check into the timing issue
See more
Back
Top