• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

MIKESPOLARA's latest activity

  • MIKESPOLARA
    MIKESPOLARA replied to the thread which coil?.
    Mainly I was looking at replacing the coil because I do not care for a yellow coil. This set has been on the car for 20+ years now. I'll...
  • MIKESPOLARA
    MIKESPOLARA replied to the thread which coil?.
    You can see it on the fire wall
    • thumbnail (80).jpg
  • MIKESPOLARA
    MIKESPOLARA replied to the thread which coil?.
    This is exactly what it looks like. Says 72-74 B body. I'm thinking just leave it all alone.
    • OPHS.jpg
  • MIKESPOLARA
    MIKESPOLARA replied to the thread which coil?.
    MY Accel coil has 1.4 ohm pri and 9,9k sec. The MSD has half as much ohms, .7 pri, 4.5k sec. Is this only a concern when you have points?
  • MIKESPOLARA
    MIKESPOLARA replied to the thread Polishing Glass?.
    Absolutely. Anything more then very light hazing is almost impossible to remove. And if you do it will show distortion from the waves...
  • MIKESPOLARA
    MIKESPOLARA replied to the thread which coil?.
    Some guy said it would burn up, told him it's been on the car for 24 years like that. So then the question is which coil, voltage, ohms...
  • MIKESPOLARA
    My 63 max wedge clone has the over the counter Mopar electronic distributor that has the mechanical tach drive, no vac advance. The...
  • MIKESPOLARA
    MIKESPOLARA replied to the thread 426 wedge tuning question.
    No springs, distributor is locked
  • MIKESPOLARA
    Figured on replacing spark plugs in max clone engine. Plugs I removed are Champion RJ14YC. All the books say should be RJ12YC. The 14 is...
  • MIKESPOLARA
    He has his own dual aluminum 15/16" bore which is the way I'll probably go. He makes the firewall adaptor for this master and the new...
  • MIKESPOLARA
    Well Dr Diff just texted me. He has the master and pointed me to the hardline set up. They take a different approach by making a new...
  • MIKESPOLARA
    It's a simple changeover on this car. The distribution block is located below the master on the frame rail. Single line from master to...
  • MIKESPOLARA
    Are they in Mt? The site I looked at was called, DOCTORDIFF DRIVETRAIN, is this correct?
  • MIKESPOLARA
    They don't list anything on their website, I sent an email, doubt they respond. Seems most business never respond to email. I hope I was...
  • MIKESPOLARA
    yes, but I don't want to bother making a couple of new hardlines. I would think somebody would have a plug and play
Back
Top