Recent content by MikkoV

Yes, actually i have temporary starter button. Should wire that also correctly...

Both those signals seem just fine, and injector signal pulses.

I installed retrofit Mopar PCM kit from Swap Specialties to my car (1970 Charger) last weekend, it has been running couple years with aftermarket ECM called Tatech, but it didn´t work like streetcar was supposed to, so... Kit uses PCM from -09 Challenger 6.1 M/T Just this minor problem, it...

That´s what i´ve found too, but not info what threads are in box and pump, i´m from Finland and starting to have bit tight shedule to get my project running, i would prefer to get these here locally, international shipping can mess things up... What this box core is originally, and what car...

I´ve been strugling to find this info, what type of fittings are in Borgeson 800126 steering gear, and in 2007 6.1 Hemi PS pump, Jeep model to be exact.

Looking for P/S lines to my Charger, anyone know what fittings Borgeson box and Jeep P/S pump uses.

I´m using Finnish Ecu, called Tatech. I´m familiar with that from my previous projects and i can use quite nicely Jeeps harness, just need for diagram. I have that Tatech also in my LS3 powered supercharged 2gen Camaro, for that we made harness from scratch.

I´ve been working on my car occasionally, but not much Hemiswap related stuff, just generall stuff so haven´t been updating this, some pics if interested -> https://www.flickr.com/photos/129610973@N03/albums/72157649635497619 Question: Wiring chematic/diagram for my engine? it´s from 2007 SRT8...

In GM steering column with electric PS which i use, only information that comes outside of unit is speed signal. Assist is originally maximum when car is in place, and decreases when speed raises. So, i have added small "ECU" that generates speed signal pulse, and signal is adjustable but...

But these are just electrically power assisted. When these fail, steering is just normal manual steering and can be driven normally just fine. Ofcourse there´s possibility that it starrts to assist in wrong direction but... I found tradiotinal hydraulic power steering much more dangerous, in...

I don´t quite get that (X) to 1 on steering, can it be converted wheel turn from lock-to-lock, find it more understodable. I like that ratio to be generally at 2 to 2.5 turns.

Feel in my case is Ok, and it is adjustable.

I have Borgeson box installed in my Charger project. Before i bought that box, i´ve already gotten fast ratio idler / pitman arms. What do you guys think, will it be too fast / unaccurate. Or do i need stock lenght arms...? I like fast steering but, is it too much.

I decided to go with electric power steering for relibiality and SAFETY reasons. My Camaro is competition spec drift car, and its really common in that use that serpentine belts pop off or break. Even in oem solutions, but often with engine swaps when rack and p/s pump are from different...

I have quite similar looking column with electric power steering in my Camaro, with rack&pinion. Works nicely. Total cost with used column around 200-300$, not noisy at all. I used Opel Corsa C column. Don´t know why, but that´s very popular here in Finland in retrofit use (mostly in...