• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by mopamatt59

  1. M

    543 Stroker intake manifold reccomendation

    I ran a 543 stroker in my Challenger. It had an Edelbrock Performer RPM aluminum intake port matched to my heads. I ran 440 Source aluminum heads. Good torque, made peak HP I think at 5600 RPM and made 615 HP / 651 ft/lbs of torque on the dyno. A good "grunt" motor!
  2. M

    Headers for a 426 wedge

    I don't know as the engine is currently in the machine shop.
  3. M

    Headers for a 426 wedge

    Hey folks, I have a 1965 Satellite with a factory 426 street wedge (currently being overhauled). I was wondering if the exhaust ports are the same as a stock 440? In other words will headers for a 440 fit a 426 (non-hemi) engine? I have used Doug's on my 440 that was in a 1974 Challenger and...
  4. M

    Are Classic Industries wire harnesses still from M&H via Year One?

    Another good source for Mopar only wiring harness is Evans wiring out of Pennsylvania at www.evanswiring.com.
  5. M

    65 Only

    The car is absolutely gorgeous! I have a 1965 Satellite all original with the 426 S street wedge that i will be restoring. It is my understanding that only around 250 with an automatic transmission were made in 1965. Where did you get your valve covers?
See more
Back
Top