Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Glass gets nasty over the years and builds up a film. (Remember Acid Rain) The scratches may be in that, not the glass itself. Before you go replacing it.......Try this first..... Clean the glass with a good glass cleaner. Then use "Bar Keepers Friend" (glass top stove cleaner/ sold in grocery...
** 67 Charger 440 4spd - 1 of 132 produced / 18 known to exist to date **
I guess nobody wants to save it and Im tired of messing with it, so its getting parted.
67 Charger L code 4spd body rolling w/8.75 rear and clear Va. title. Asking $3000
67 440HP block w/crank (10/24/66 casting date...
Clean original paint trunk lid, has some primer around the edges. Seams all look really good. Inner cavities have only light surface rust with no pitting that I can see or feel. One small dent to the right of the lock hole. Lock plate not included. Check out the pix..... message if you need...
NOS set bought in 1977 for a 70 GTX. These are still in the big box Ma Mopar shipped them in. Packaging is intact on 3 and one is open in the middle. These will be shipped in the original box inside a larger box.
$1200 + actual shipping. I may be able to arrange East coast pickup/drop off...
The block was bored .010 over I think but you can’t buy .010 pistons that I know of. Rods and pistons were MIA. I never checked crank journals. Everything was covered with bearing grease so there should little to no corrosion.