• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by mopardude318

  1. mopardude318

    SOLD Big block solid lifters Johnson brand.

    One more question, do these have a snap ring retainer or a wire clip? Hard for me to see.
  2. mopardude318

    SOLD Big block solid lifters Johnson brand.

    Will these work in a small block as well? Thought they all used the same lifters?
  3. mopardude318

    B&M 162ci blower for smallblock

    Thanks for your interest! 4 months ago I converted the car over to a 4 speed, and beat the ever livin hell out of that 318 until it could take no more...LOL It ended up cracking a piston /wrist pin. So I pulled it out of the car, and tore it apart. So now my "plan" is to build a dedicated...
  4. mopardude318

    B&M 162ci blower for smallblock

    Minor update. Here's the 1" shorter snout installed on the blower, I had to use a shorter snout to clear the mechanical clutch fan. Now I have to machine 1" off the blower pulley spacer. :blob: After months of saving little by little, and a 10% off coupon from summit, I finally was able...
  5. mopardude318

    B&M 162ci blower for smallblock

    Okay, thanks for the heads up. I will use the 750 holley supercharger carb. I also found out that one time B&M made a fuel injection system back in the mid '80's just for these superchargers. It's very neat! I would like to come across one someday, but of course, extremely rare...
  6. mopardude318

    B&M 162ci blower for smallblock

    Hey fstfish! Yes, the pulleys are still available. I have a 6" crank pulley and a 3.5" driven pulley, which "should" make about 7psi on a 318...I also plan to use a water/meth injection system as well...
  7. mopardude318

    B&M 162ci blower for smallblock

    I know it kinda goes against the rule of thumb, and is odd to me... but I've been told by others who have a similar setup to use a DP...There's some other threads on the chevy forums if ya search for these mini blowers on google, with contradicting advice, use a DP, they work great on these...
  8. mopardude318

    B&M 162ci blower for smallblock

    Been away for a while, been slowly gathering other parts needed for this swap. I am in the market for a carburetor. What would you guys recommend? I have my eye on the Holley line of supercharger carburetors, like the 750 mechanical secondary manual choke version...
  9. mopardude318

    B&M 162ci blower for smallblock

    okay, so what thick head gasket would you recommend? do ya have a PN? I dont remember which ones I used that came in the re-ring kit I got from summit. it was just a standard re-ring kit... another recommendation i got was to use the felpro 1008's. Going with the thicker head gaskets, would...
  10. mopardude318

    B&M 162ci blower for smallblock

    I was hoping I was gonna be safe due to the lower compression, and I was gonna use water/methanol injection. And maybe use a boost retard ignition if it's necessary...In cali, we are limited with pump 91 premium as the highest. Not the greatest... ???
  11. mopardude318

    B&M 162ci blower for smallblock

    This is my current 318 Its a completely stock bottom end from a mid to late 70's car. (cast crank, rods, pistons.) Its got keith black silvolite cast pistons that are .060 overbore, with 4 valve reliefs and they are .070 down in the hole...(remember late 70's low compression) I did a...
  12. mopardude318

    Wheel options, paint or powdercoat?

    LOL ^^ Yep. I would powdercoat.
  13. mopardude318

    My Frankenteen build...

    anything new to report?
  14. mopardude318

    My Frankenteen build...

    glas its back up! ya changed ur name now?
  15. mopardude318

    Hay yall...

    id love to own one...theres a 69 or 70 Plymouth GTX a mile away from my house. some crack head owns it. just sits out front in the sun with a half assed car cover on it...it has all the right stuff from what i can tell...its brown (dunno the proper color term) and has the GTX stripes too. he...
Back
Top