• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by ms2420

  1. M

    How Loud are Adjustable Rocker Arms with Hydraulic Cam?

    I have some work to do!
  2. M

    How Loud are Adjustable Rocker Arms with Hydraulic Cam?

    I have the same cam in my .040 over 440 sixpack set up. Just curious, how much vacuum are you pulling? Power brakes work okay? Still tuning mine but 11mmHg is about the best I've gotten out of it so far. Also going to readjust rockers as mine is slightly more noisy than yours. It does quiet when...
  3. M

    FOR SALE Nice A body 71 Demon twin scooped hood

    If you decide to sell the scoops separate, I'm interested
  4. M

    FOR SALE Misc parts, window roll handles etc

    Update: found some more parts to add. Total of 8 window cranks, 5 of one style, 3 of another. 3 Quarter courtesy light housings with lens (PN 2572521). A "Charger" insignia, not sure if it's from interior trim or glove box maybe? And a bunch of misc parts. $100 shipped to the lower 48. The light...
  5. M

    SOLD Used 440 TRW L2266 .030 pistons, rings, pins

    Sale pending! Thank you
  6. M

    SOLD Used 440 TRW L2266 .030 pistons, rings, pins

    A few people requested more pictures of the skirts. The lines on them are not gouges and cant be felt when touched. Any marks in the surface came from them being in a box and touching each other. These are forged, not cast.
  7. M

    WIW - Dual quad setup

    Wow, cool pictures. So much history here! Those cross rams are SWEEEET!
  8. M

    WIW - Dual quad setup

    Well it is definitely a 413 set up
  9. M

    SOLD Used 440 TRW L2266 .030 pistons, rings, pins

    These were taken out of a low mile street 440 (stock) that ran very well. Sprayed with WD40 and sat in a box for years. I quickly cleaned them up and they don't look too bad to me, there are some marks on them but I think they would be good for someone doing a budget build. The one pictured was...
  10. M

    WIW - Dual quad setup

    Wow, thanks for the link. He sure got his to clean up nice!
  11. M

    WIW - Dual quad setup

    Yes definitely fun, and I have to look, because I remember seeing at least one oval air cleaner somewhere in there. Maybe I'll get lucky and find both!
  12. M

    WIW - Dual quad setup

    http://www.forwardlook.net/forums/forums/thread-view.asp?tid=35808 This is definitely the manifold... No doubt. The numbers are on a plate that's screwed in like this one. Only thing I can think of is that someone mistook this manifold for the 1827899 because they are so similar. The dealership...
  13. M

    WIW - Dual quad setup

    Ok, Mopar only lists 3 casting numbers for a 383 dual quad: 1827899, which this is not... There are no breaks in this casting like the one on ebay. The others Mopar lists are 1947162 and 1947163 which are for the 383 and 413 and are the long cross ram left and right sides. I went back out and...
  14. M

    WIW - Dual quad setup

    Yes, thank you. I saw that one on ebay. That looks like the manifold but can't be sure without the numbers. I will blow it off with air tomorrow and hopefully figure it out. Have lots of other stuff in my parents garage. Will get pics and list the stuff I'm going to be selling in the forums.
  15. M

    WIW - Dual quad setup

    Found some numbers. Base plate of front carb: 3258S E5 Base plate of rear carb: 3259S E5 Lower portion of each carb body: 0-1242 Top of each carb, right side : 5...
See more
Back
Top