• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

MTBRider's latest activity

  • MTBRider
    MTBRider replied to the thread Pics from Back in the Day.
    From a 1/3 mile clay oval circa 1979ish. 426 wedge, went like hell down the straight but pushed into the corners. All steel car, pretty...
    • IMG_0032.jpeg
  • MTBRider
    MTBRider reacted to c.moo's post in the thread Detonation? with
    Thanks!
    .
    Halifaxhops might be able to help you with that. He is a member here.
  • MTBRider
    MTBRider replied to the thread Detonation?.
    I’m considering sending my distributor out for someone with the ability to verify condition and rebuild/recurve if needed.
  • MTBRider
    MTBRider reacted to Rebelrouser's post in the thread Detonation? with
    Thanks!
    .
    I use an engine software to generate an advance curve, and then recurve the distributor to eliminate detonation. Performance Trends...
  • MTBRider
    MTBRider replied to the thread Detonation?.
    It’s a basically stock engine with a lot of miles and I think compression is down a bit. I put in a limiting plate to reduce total...
  • MTBRider
    MTBRider reacted to kiwigtx's post in the thread The Meme not a Meme Thread Part DEUX with
    Like
    .
  • MTBRider
    MTBRider replied to the thread Detonation?.
    Search “old car knock sensor” and you’ll see some options for aftermarket units.
  • MTBRider
    MTBRider replied to the thread Detonation?.
    Not sure, I could hear it occasionally. I picked up an AFR gauge for better tuning this summer to hopefully use it with some timing...
  • MTBRider
    MTBRider replied to the thread Borescope.
    No, that pic is going through the spark plug hole
  • MTBRider
    MTBRider reacted to Nxcoupe's post in the thread Borescope with
    Like
    .
    That looks very similar to my 600 buck snap on unit. I've had it for 7 or 8 years now. Yours def has clearer pics than mine for aome reason.
  • MTBRider
    MTBRider replied to the thread Borescope.
    I was surprised on how good the image quality is and that you can record video or still images. Great addition to the toolbox
  • MTBRider
    MTBRider reacted to toolmanmike's post in the thread Borescope with
    Like
    .
    Those things are handy.
  • MTBRider
    MTBRider reacted to PurpleBeeper's post in the thread Detonation? with
    Like
    .
    Probably detonation. When I've had it in the past, the pistons looked like they were shot point blank with bird shot BB's
  • MTBRider
    MTBRider posted the thread Borescope in Shop, Garage and Tools.
    Just purchased a Vevor borescope from Amazon for about $60 and so far very happy with it. Build quality and image quality seem very...
    • IMG_0003.jpeg
    • IMG_0002.jpeg
    • IMG_5840.jpeg
    • IMG_5842.jpeg
  • MTBRider
    MTBRider posted the thread Detonation? in General Mopar Tech Discussions.
    Finally purchased a borescope and this is what I saw. I assume this is due to detonation which I’ve been struggling with occasionally...
    • IMG_0001.jpeg
    • IMG_5848.jpeg
Show older items
Back
Top