Recent content by myfeather626

That happened to me in my Flat Bottom boat at Lake Elsinore. I have a Hemi motor in it with direct drive set up I got water spray up on the engine that was one cold event g before getting towed back to the Loading Ramp!

Nice Color!

I did use that sealer on the beige. I have none on my Challenger!

You could just leave it. Reuse it!

Once started try to peel off the rain gutter sealer! I used a bent Pic tool!

The workers putting the sealer on did a terrible job! lol! Night shift maybe! I did see sealer on my Charger where the Cowl and firewall come together it is a foam seam sealer! Also it is suppose to have that foam seam sealer where the rear side window stainless Moulding in the C shape of the...

I used one of those Pic style tool and muscle! You could heat t a little just stay from the Roof sheet metal. I don’t believe I would use a torch but rather a heat gun!

Remember to tape all the seams with Duck Tape leave on only to create a 2” space in between tape on both sides of seam remove the Duct tape before it dries you will have a nice seam once both pieces of tape are pulled up. It really works good leaving equal band of seam sealer otherwise it will...

DO NOT USE FIBERGzlASS If you could do a one piece floor Board, would be nice! Also replace the windows! This makes your Restoration pop! And I don’t care what anyone says New Glass Makes a Show Car! With that shiny new Paint you need to buy some Shiny new Glass in all windows over 50 years...

Thats what I used.

Dp90 or 70., 90 is Black. Dp 70 is rust Color I used 90 it is Super durable however after 90 days you have to respray the Body Primer if you did not paint the vehicle. Or coat the primer? They originally used green I forget the Number it is green/ greyish .

Same here! Research Everything!

Right on!

Way Wrong you used the Wrong Seam Sealer it is a two Part Sealer can’t go Cheap does not work!

It is self Leveling!