Recent content by ornaryal

and of course 413 and 426 rb

there is or was one on ebay last nite

just tell us what the colour is

When i was young I worked at a chrysler dealership when a old car came in on trade with a good body and noisy lifters , we would check adjustment , then put new lite oil with 2 quarts of trans fluid one of the salesmen drove it for a while 7 out of 10 times it did the job . but the cause was...

Up here I use auto sol to polish; al, chrome and ss after a good cleaning , and then a good wax to protect it dont forget chrome is a coating , not a solid metal stamping like stainless , years ago I used jewellers rough , to make the movie camera guys from california happy. I could bring up...

hi will they also fit the 68 rt

a few years ago i bought a new set of springs for wifes 55 belair from speed shop fought like hell to get them in they pulled the shackels way in too far . so i phoned detroit spring , that made them , checked the numbers and they were over arced , for a gasser . could not use main leaf . used...

hi cant tell if they are al or stainless

I got a set of tracks for the 70 look every bit as good as org , got them in less than 2 weeks , no issues with them .

I have rebuilt far worse on rare hoods lids and doors adv it see what responce u get

ok u know about repop , I adv for 2yr finally bought whole dash to get working org, good luck

I just did a 850 us order with them direct in nov and had it in less than a week , have dealt with them before many times with no problems in product or service ,

When I painted long ago we rubbed vaseline on all exposed skin and then taped arm ends and bottom of coverals with masking tape . and some time if we ran out of paint reducer I have used hi test gas from texaco , didnt affect paint finnish amd we thought it made it shinier some times .Also have...

do u still have 66-68 4 spd consul plate

I need dr side