• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

ozzymaxwedge's latest activity

  • ozzymaxwedge
    ozzymaxwedge replied to the thread Cool Can for Fuel.
    Yep, do what DVW Doug said, they are a pushing pump not a pulling pump, get rid of that glass filter and insulate lines from hot area’s.
  • ozzymaxwedge
    ozzymaxwedge replied to the thread Back on the road again.
    Looking forward to running at this track come Drag Challenge Oct Tex Good luck
  • ozzymaxwedge
    ozzymaxwedge replied to the thread Indy 400-15 tunnel ram.
    Nice Put your 950’s on it now !! I’m running twin 950 APD carbs that are beautiful but wish I went for 1050’s
  • ozzymaxwedge
    ozzymaxwedge reacted to Bluefish's post in the thread Indy 400-15 tunnel ram with
    Like
    .
    Good to know. I will be picking 1 up right after the holidays. Who has the best price on these?
  • ozzymaxwedge
    ozzymaxwedge reacted to Bluefish's post in the thread Indy 400-15 tunnel ram with
    Like
    .
    Ok, cool. Must be clean inside?
  • ozzymaxwedge
    ozzymaxwedge replied to the thread What Heads ?.
    Do you mean I will see a big power difference between the current SR’s that are 360cfm and the dash 1’s at say 380cfm ? I was going to...
  • ozzymaxwedge
    ozzymaxwedge replied to the thread What Heads ?.
    I do have another new cam here that I picked up in a group of other parts, it’s a Comp roller 289 289 108 and would be 716 lift
  • ozzymaxwedge
    ozzymaxwedge replied to the thread What Heads ?.
    Hey Doug, Cam is R280 4468-8 , 446 lobe x 1.6 is 713 gross and 690 net lift . We go through though traps at about 7200-7300 rpm.
  • ozzymaxwedge
    ozzymaxwedge replied to the thread What Heads ?.
    Don’t think so, -1’s have a straighter port that’s why you need offset intake rocker
  • ozzymaxwedge
    ozzymaxwedge reacted to Budnicks's post in the thread What Heads ? with
    Like
    .
    There's a lot better ported head out there maybe have yours reported/better, larger valve etc. or are they maxed out ? not really 100%...
  • ozzymaxwedge
    ozzymaxwedge replied to the thread What Heads ?.
    Thanks for the replies, So if the SR’s are 360 and the 440-1 are 380 in real HP is that around 40-50 ?
  • ozzymaxwedge
    ozzymaxwedge reacted to 33 IMP's post in the thread What Heads ? with
    Like
    .
    If you want more than what you've got, get more than what you've got. 345s with big valves. Give the new heads a fair shot to be better...
  • ozzymaxwedge
    ozzymaxwedge reacted to PRHeads's post in the thread What Heads ? with
    Like
    .
    I guess you’d need to ask yourself………how much more power would the new heads have to make to justify their cost? I have ported SR’s...
  • ozzymaxwedge
    ozzymaxwedge replied to the thread What Heads ?.
    think I’ll give the B1 a miss, yes 572-13 is 4.5 I think . If it’s 440-1 do I go 325 cfm or 345 ? Do I go bigger valve (2.25) or not for...
  • ozzymaxwedge
    ozzymaxwedge posted the thread What Heads ? in Racers Hangout.
    Hi all, Looking for a little power, (always) for our big block. Currently 440/528 4.375 Molnar crank, Eagle rods, kb 12.6-1, maxed out...
Show older items
Back
Top