Paul_G's latest activity
-
Paul_G replied to the thread VIN dash tag restoration.Really? They work great. I am going g to free hand the chrysler logo....... Just messing with you. The rosette rivets, decal, and door... -
-
Paul_G replied to the thread VIN dash tag restoration.Tag and dash different shades of black. I like that better. Did you use a satin black on the tag?
-
Paul_G replied to the thread VIN dash tag restoration.Excellent advice. As you can see, I had no choice but to remove it. The rust pits in dash were so deep it took several coats of high...
-
-
Paul_G replied to the thread VIN dash tag restoration.Thanks guys. My memory was correct. Going on all black just like 53 years ago.
-
I am restoring the dash right now for my 72 Satellite. The VIN is off the dash for cleaning and repaint. I have new rivets and Chrysler...
-
Paul_G replied to the thread Fitting a 42RH in a B-Body?.I had to cut the floor support and weld in a plate. The drivers side inside bolt was too close. I drilled a new bolt hole in the floor...
-
-
Paul_G replied to the thread Fitting a 42RH in a B-Body?.I will attach some pics of my 46RE mocked up in the 72 Sat. The trans is out for rebuild right now or I would show it. . I did the...
-
-
Paul_G replied to the thread Fitting a 42RH in a B-Body?.Ive done a few of the 46RH swaps. All in B Body cars. Sometimes the floor just needs to be hammered out some, sometimes the pinch weld...
-
Paul_G replied to the thread 400 budget build.So much for the budget build. I pulled the 505 out this weekend and started thinking. I was going to use an old cam and lifter set I...
-
Paul_G replied to the thread 72 Charger Chrome Bullet mirrors.Maybe it's time to start making them in the good old USA. And up the quality a few ticks.
-
Paul_G replied to the thread 400 budget build.I have a complete 440 that I am saving, checked the crank, not drilled for a manula trans. I have another 440 crank, checked it too, not...
-
Paul_G replied to the thread 400 budget build.Got the report from the machine shop. Block needs an overbore so build on the cheap is off the table. We are going with the $700 KB240...
-
lets preface this with im no expert,ive just had a lot of experience over the years. i would deffo get the 9-1 pistons,and build the...
-
Paul_G replied to the thread Rapid fire pops out the carb, new cam time?.Changed the springs to Comp 911's. The old springs were the problem. It now revs to 6000+ easily with no issues.
