• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by penstar pete

  1. penstar pete

    Door Window Lift Bracket Install Help

    That was some great information. It helped a lot.. Thank you !!
  2. penstar pete

    Door Window Lift Bracket Install Help

    On my 68 Charger the nylon rivet that holds the window lift bracket to the glass has lots of play. I found a kit on CI, but I'm not sure how to change it. I watched a video, and one guy said there is a bushing type of piece that the nylon rivet goes thru and it has to be crushed with a C clamp...
  3. penstar pete

    Glove Box Lock Catch Help!

    I drilled 2 new holes and used the one I had. Works great... Thank you
  4. penstar pete

    Glove Box Lock Catch Help!

    No not yet. I just got that picture a few min. ago. I have to do some digging tomorrow. At least now I know what I'm looking for.
  5. penstar pete

    Glove Box Lock Catch Help!

    Evidently I have an early 68 dash frame. Below is the pic that was sent with the correct glove box latch ( 1 1/2 inch. ) Finally have this solved. Thank you to all for all the pics and help.
  6. penstar pete

    Glove Box Lock Catch Help!

    If that's true, by any chance would you know what type latch I would need ?
  7. penstar pete

    Glove Box Lock Catch Help!

    I assume its a 68, it was in the car. I removed it when I had it powder coated. It fits good, its a rallye a/c dash. I'm kind of at a loss.
  8. penstar pete

    Glove Box Lock Catch Help!

    Thank you for taking the time and effort taking pics. Check my pics out. I cannot figure this out. It doesn't make sense. There has to be another latch. Last resort is to center it and drill 2 more holes. It's tough because there is not a lot of room.
  9. penstar pete

    Glove Box Lock Catch Help!

    Really ?
  10. penstar pete

    Glove Box Lock Catch Help!

    Finally putting the interior together in my 68 Charger. It has a rallye A/C dash frame. The glove box catch is spring loaded and the mounting holes measures 2 1/2 inches apart. The dash frame mounting holes measures 1 1/2 inches apart. Is there a smaller spring-loaded catch or a different type...
  11. penstar pete

    Console Wire Harness

    I needed a backup light harness for my 68 Charger. No one seems to make the harness that runs from the console to the left side kick panel. Finally read a couple of threads on here and someone mentioned Tommy from Parts Hound. I called him and he knew exactly what I was talking about and what I...
  12. penstar pete

    68 Charger Belt Molding Clips Help !

    Spoke to Rich, he only had a repo kit that he said is not a good fit. I was hoping that someone has an extra clip thrown in a coffee can. these are pics of an original outer belt mld clip.
  13. penstar pete

    WTB Belt Moulding Clip

    Hope this helps.. Thanks
  14. penstar pete

    WTB Belt Moulding Clip

    I'm looking for a Belt Molding Clip for the outter door molding. Hopfully someone will have one Thanks !!
Back
Top