Recent content by Phil Anderson

I bought a new 971 from Schumacher a few years ago. They said that you can still get them from a dealer.

You will need a front bumper with no parking lights.

And the best way to install the new bushings is to remove both pivots and arms. You loose less skin that way.

Need a right side wiper arm for a 1977 Dodge Monaco Plymouth Fury. Mine is stripped out.

Wiper Linkage Here is how I installed the wiper cam. At this time the wipers will only go from the park position to the half way mark on the windshield. The motor appears to be operating correctly in regards to speed and the park function. Can somebody tell me if I have this in wrong please.

My Rosco The build went well. Rosco is very fast. Has 290 gears. Top end on paper @6500 rpm is over 150 mph. The car will fall apart first. May do some lower gears over the winter. Engine dyno'd at 427 hp at 6300 rpm. Forgot what the torque was.

I have replaced all of the items in my Monaco. Wipers will not come out of park function. Only go part way. Motor appears to be functioning properly. Wonder if I put cam assembly or link in wrong. And you should pull the motor to work on this. Good would be good too

Almost went to the spring shop. Found out via my Bishko parts CD that nine passenger wagons had the round bushings. Since mine is a cop car it made sense to me that it had them too. I found them on Amazon for eight bucks apiece ! Some NOS guy wanted $60 to $80 apiece for them. It pays to...

I'm going to try the kit from Summit. It appears to be the same one as from PST and Just Suspensions and Energy suspensions. the install guide says you have to remove the sleeve that was in between the bushing and the eye of the spring. Summit has the best price and shipping is free on orders...

I am replacing all the bushings on the rear end in my 77 Monaco. I think I have found the correct kit to use from Summit. All the new front bushings on the rear leafs are oval shaped. The ones that I removed are round ( was a bxxxh to get them out ) has anybody used these yet ? Also what...

Pipes on exhaust all tightened and lined up sounds great !! Now I have to replace the carb and all of the leaf spring bushings. Thinking of getting a Street Demon 1904.

Yes it works nice. Moves well, both springs still on it. I have the long tube nuts as well. I prefer to sell as a pair.

I have for sale a pair of exhaust manifolds off of my 1977 Dodge Monaco 440 CHP police car. $100 plus shipping for the pair.

That's what I used.

The pipes fit pretty well after all. The only problem is that TTI does not make any pipes to go from the exhaust system to the Schumacher short headers that are made by TTI. They said that since there are so many different configurations they make them all. A call to Accurate exhaust...