Recent content by pkbenavidez

What kind of problems?

Thanks! I'll try that.

It has a Comp hydraulic roller SN#VO0177-11 Part#23-713-9 Grind#CRB3 XR292HR-10 Can't really feel it from under the hood while at that rpm and don't hear any misfire. In fact the engine runs smooth. Maybe I deed to have someone in the car controlling the RPM's while I check under the car. Does...

My bad, the FP is round with no cut out and its a forged crank. The stroker kit comes already balanced. Man its tough having to do things alone. might have to take it to the shop and put it on a lift.

the shop said they balanced everything internally and no weights on converter. I do have the flex plate in pic #2, but it was balanced on the motor also

At first I thought it was the driveshaft, because it vibrated between 60 and 65 mph, at 2100-2500 rpm. then I put it in N and it still did it at that RPM, the same in P. Yes it was balanced with the flexplate and balancer, has rubber mounts. TCI says to torque the bolts to 45-55 ft lbs, but I've...

Hello everybody! I'm getting a vibration at 2100 to about 2500 RPM. I'm running a 440 with a 505 stroker kit from 440 source, chrome fluid damper from 440 source, flexplate from 440 source, and a TCI Breakaway TQ with a 2200-2400 stall. I'm also using an electric fan. It vibrates in park and in...

I just rethreaded mine to 1/4 and put washer and a regular 1/4 nut. Works better.

71 I'll take better pictures when it stops raining - - - Updated - - - - - - Updated - - -

Yes, I want to attend in one. I was going to go to that one last year but had a rear main seal leak and didn't want to drive it that way, but I have it fixed now. When is it?

How bout east New Mexico, Amarillo, Odessa, or San Angelo.

Thanks! I appreciate that.

Any car shows coming up in the Lubbock area?

is that 489 casting, and how is it working now

thanks, that helps alot