• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Plumber452's latest activity

  • P
    Plumber452 reacted to sixtiesmuscle's post in the thread Build Thread- 64 Fury Convertible with
    Like
    .
    Finally Back at Home !! Needs one more final hand rubbing, and start putting things back together !!!
  • P
    Plumber452 reacted to Dave6T4's post in the thread Build Thread- 64 Fury Convertible with
    Agree
    .
    Oh man! That is really hard to hear. It sounds like he is pretty busted up, and lucky to be alive. My prayers are with him and you. It...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    Thanks for the advice!!!!
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    Thanks!!! As for my time , fortunately I'm retired but still do a little consulting work . If I counted my time at $1.00/hr I've...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    That's what I was kind of afraid of after reading that those seals can leak. I've never torn into an automatic transmission before but...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    Good point. What kind of pressures should I see? I can look it up but which opening is which as far as supply/return or in/out or does...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    Tha Thanks!!! So what's your guess if the filter is correct and nothing obvious in the pan?
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    So, I apologize for being a Dumba....s up front. I was wrong on the spline count. I was looking at the outer count not the input shaft...
    • Torque Converter Spline count.jpg
    • Trans input spline.jpg
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    And the plot thickens!!!! If my memory serves me correctly I only remember the filter having one hole. But if I actually needed a two...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    I'll check that. Although when I do put it in Drive or First I can still feel, albeit slight, a "Clunk" like its going in gear. The one...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    Yes it's an unmodified transmission. The original engine was a 1963 413. The replacement engine is a 1976 440 block and internals as I...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    I don't recall the number of holes on the original or replacement filter. The replacement came from Fatco Transmission along with...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    I've not done any diagnostics on it yet. I agree with you that a weak pump might be the issue. But, to answer your question yes it did...
  • P
    Plumber452 replied to the thread 727 Not Pulling.
    Yep. It's a Hughes and was sized for the engine
  • P
    Plumber452 posted the thread 727 Not Pulling in Engine, Trans & Driveline.
    Hello All, So I got my 1964 Plymouth Fury up and running that had not been run since at least 1976. Put a rebuilt engine in it, new...
Show older items
Back
Top