• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

pnora's latest activity

  • pnora
    pnora replied to the thread HARNESS issue.
    Sounds like someone did some wiring at some time. Post a picture of the bulkhead connector and firewall hole.
  • pnora
    pnora reacted to Sam69sat's post in the thread Odometer skipped ahead with
    Agree
    .
    If the thousand wheel (or ten thousand) doesn't have the index locked up against the stop plate, could it/they be dragged along every...
  • pnora
    pnora replied to the thread Odometer skipped ahead.
    Would depend on which one is out of place.
  • pnora
    In his first post he did not say rheostat he said gauge thats why I said bad sender. .
  • pnora
    pnora replied to the thread Odometer skipped ahead.
    If you do not understand , then what I described above is most likely what you overlooked.
  • pnora
    pnora reacted to Sam69sat's post in the thread Odometer skipped ahead with
    Agree
    .
    I haven't had one apart for a while but i believe this is what pnora is talking about. Those little legs need to be up against the stop.
  • pnora
    pnora replied to the thread Odometer skipped ahead.
    You most likely do not have the odometer wheels lock plates indexed and secured on the bar.
  • pnora
    Sounds like the sender,s rheostat is open. Have you tries ohm-ing the sender itself?
  • pnora
    pnora replied to the thread Correct front brake hose.
    That Dorman hose crosses to the OEM number 3880804. Post some pictures of why it wont fit.
  • pnora
    pnora replied to the thread Correct front brake hose.
    Far as I know the calipers mount to the rear. Google and you might find some pictures or videos of line placement. One video I found.
  • pnora
    pnora replied to the thread My untimeable motor..
    Timing for the most part is all distributor related and its mechanical functions. Leave the vacuum can plugged off and go from there. .
  • pnora
    pnora reacted to Don Frelier's post in the thread My untimeable motor. with
    Agree
    .
    See if the centrifugal advance plate is sticking. I've seen it happen.
  • pnora
    pnora replied to the thread Correct front brake hose.
    What are you working on? A Simca?
  • pnora
    pnora replied to the thread Timing cover replacement.
    Read the FSM is illustrates the correct and acceptable timing chain stretch.
  • pnora
    pnora replied to the thread AC controls cable clamp needed.
    Cable Clip for Heater, Air Grabber, Shaker Cables, Air Grabber 1969 Ramcharger 1969-70, 181-6015143 Reproduction, NOS and Used Mopar...
Back
Top