Recent content by Polo62

I put another used carb on today quadrajet and it quit backfiring but still has a miss I'll try condenser next thanks everyone

I'll try that next it runs missing but not a dead miss but when you try to go over half throttle it starts backfiring and won't rev it also goes dead every time you put it in gear so I crank it in gear no nuertal safety switch

70

Where are the dodge charger folks mounting aftermarket tachs?was gonna put it on steering column but can't see the speedometer then would like too put it in dash where there suppose to be a clock but can't figure out how to get all that out to install it

Will a smoke machine tell me if valves are bent or leaking

I got a 400 big block out of a 77 newport with lean burn I ditched the carburetor and distributor for a points distributor and a holley avenger 770cfm I set the timing around 8 to 10 btdc seems like that's where it ran the best which still is not smooth it misses and backfires threw carburetor...

I see more than 500 in parts I'd buy it

Where do you buy the fbo box

What kind of problems will a stock torque converter do to engine when they ain't working right

just run the old valve springs until cam is broke in

They made some 383,s with 4 barrel and hp manifolds and 10.1 pistons and didn't have hp cast on the pad they were 330horsepower engine while hp motors had 335 hp with dual valve springs I have the 330 without hp in a 68 sport fury

I hooked mine to the alternator

That would be cool with a slant six like powernation built with 403hp and over 500lbs of torque on utube

will a c body 3 speed wiper motor fit a 68 thru 70 charger

These cars look better than a charger