• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Recent content by prib

  1. prib

    Part number puzzle

    Pillar covers looks like some cuda pictures
  2. prib

    Part number puzzle

    Can't seem to Google my way out of this what is Mopar part number PT 3760 r h what does that fit? '70s Challenger or cuda? Thanks ahead of time
  3. prib

    FOR SALE Big block rocker assemblies

    383/440 original type rocker assemblies (2) out of running, upgraded motors. Nothing wrong with assemblies. 5000 miles on lifters, springs, pushrods and timing set 50.00 for all MUST PICKUP NO SHIPPING. 47854
  4. prib

    Axle puzzled

    Update, after measuring 68 Coronet front spring mounts 3 1/4" from bolt center to frame BOTH sides and it looks perfect, the 69 Coronets problem is somewhere somehow somebody has changed the correct amount with the 1 that's on there now, it's measurement is 2 1/2". Checking Mancini racing
  5. prib

    Axle puzzled

    Brackets are different I put them on backwards nothing spent or damaged except my ability to be a mechanic
  6. prib

    Axle puzzled

    In response to the p and the d or Plymouth and Dodge is it possible that it's passenger side and driver side. Both of mine brackets only have one bolt hole for the leaf spring
  7. prib

    Axle puzzled

    Dvw was who brought it up, but thanks for everyone's help.
  8. prib

    Axle puzzled

    I don't know the car's history, I think I took off original springs,had only these brackets to use, there is.750 difference between the two brackets I have on the car. I unknowingly put them on the wrong side. After I switch them back axle will straighten out of front to back.
  9. prib

    Axle puzzled

    BINGO!!!! I think the last post was it, after measuring front leaf brackets, they are on the wrong side to even out axle. Should have known if springs are different then brackets could be also. The answer was looking at me all the time, thanks again and I will add this to the list of exceptions...
  10. prib

    Axle puzzled

    I didn't know spring mounts were different lengths, it's possible I put them back on backwards, springs are definitely on correct side I sure hope that's it thanks
  11. prib

    Axle puzzled

    Scheduling 4way alignment check this week at body shop that knows if frame is tweaked
  12. prib

    Axle puzzled

    Thank you Doug from front of spring it measures same as my 68 Coronet to locator pin, that eliminates wrong part need to check square ness. Also measured from bottom corner of door to wheel opening, very close to drs side length that might eliminate sheet metal???
  13. prib

    Axle puzzled

    New,at time of rebuild last year, Mopar performance brand made in China. Absolutely possible wrong part with correct part number from manufacturer
  14. prib

    Axle puzzled

    Thank you all, but I measured both sides from the center cap on front rim to the cap on rear rim with the same results,pass.side still 1+" closer to front than drs.side, car's frame is in great shape with no reconstruction. Going to measure my 68 Coronet spring it looks perfectly situated in...
  15. prib

    Axle puzzled

    Nothing appears altered, where locating pin on spring is suspect made by Mopar performance,bolted right in no problem nothing changed on perch a 4 way alignment would tell
Back
Top