Separate names with a comma.
Welcome from Minnesota.
I did not see any change in the aluminum. I did not boil the ones I did but just poured the hot oil over them and let it sit.
I like to use the oil drained from a combine or tractor when the oil is very hot. Stove works too just don't spill any.
We were just married and I was in the USAF in Minot ND when our house was flooded. All our houses after have been on high ground. We learned.
Nice car enjoy it.
I have had good luck with hot engine oil and just letting the carb set in it for a week or more. I have never had to reheat the oil or have a carb...
I had the same problem. I don't know why they say for a 64 65. I cut what I needed also.
Classic city glass Isanti Mn.
This might help. Pick up a 64 a couple of years ago that had sat for years.318 cranked but no spark new points did not help. It turned out to be...
I have this one still on the engine.[ATTACH]
All States Ag Parts Auction Worthington MN August 21 Wieman Auction co
ALL PARTS CARS lists 73 71 69 Chargers, 72 Dart, 70 Coronet, 69...
I played with the shimming the side rubber bumpers on my 64. I could push the hood
Sideways that way. I added hard rubber on the sides under the...
I have found a different brake pedal on 64 plymouth cars with power brakes. Pedal arm is longer and has a higher pivot point. I cut my pedal arm...