Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1969 Plymouth Road Runner
Bahama Yellow (Special Spring Color)
RM21 (Post) Originally a 383 4 speed power steering and front disc brakes
Fender Tag, Radiator Core Support, and Trunk Drip Rail Numbers match (A Real Road Runner)
Clear NJ Title
Now has 440 automatic 727
The 727 was built by...
For Mopar 383, 400 and 440 engines
Used with only 10,000 miles of use:
*******($125.00) For everything*****
Located in Southern New Jersey
Crane Cam Grind H-278-2
Duration @ .50 222 INT 234 EXH
Lift .467 INT .494EXH
114 Lobe separation
This cam made 400 hp @ 4500 RPM on a mild 440
Hydraulic...
I just installed my new FBO kit and so far I am very pleased. I am waiting on their new control box with a built in rev limiter. But I installed the new custom curved distributor and coil with my existing orange box and ballast resistor.
I had the MP Electronic kit but the distributor was not...
Well, The pivot was in fact bent. I was able to remove it from the bell housing without removing the transmission. The pivot was cracked in the 90 degree section. So instead of being 90 degrees it was like 30 to 60 degrees.
But since I failed to placed grease in the well of the throw out...
I am in the process of installing a new clutch. I finally get the transmission bolted back to the bell housing and realize that the release bearing is only clipped on one leg of the release fork. I believe my pivot and/or fork is bent
If it is not bent, is it possible to reconnect the throw...
Well went to the track again. On my second run my gas pedal went to the floor and I was stranded on the middle of the track. What a lonely feeling!! My throttle cable came off the carb. I put a pin in it to get to the pits. On my third run at the end of the track my clutch pedal is hanging...
2.5 '' EXHAUST
3.23 GEARS 4 SPEED
235 60 15 HALF BALD TIRES @ 32 PSI REAR
WE ARE GOING NET WEEK i WANT TO BUMP MY TIMING FROM 10 TO 12 0R 14 DEGREES AND LOWER THE REAR TIRES TO 26 PSI.
MY GOAL IS 13.5