Road Grabber's latest activity
-
Road Grabber replied to the thread RB Cam Performing Right?.Thanks I will ask what size they are -
Road Grabber replied to the thread RB Cam Performing Right?.It was never on a dyno but I can tell you I could shift at 6000 if I wanted to. The engine could keep going. I never liked to going...
-
Road Grabber replied to the thread RB Cam Performing Right?.I guess you can't argue with cubic inches.
-
Road Grabber replied to the thread RB Cam Performing Right?.thanks
-
Road Grabber replied to the thread RB Cam Performing Right?.Who is PRH? The lack of much difference installing the more efficient heads and bigger cam was the reason for inquiring and higher...
-
Road Grabber replied to the thread RB Cam Performing Right?.The reliability part is what I haven’t seen or heard discussed using 500-600 hp motors. I would certainly be willing to take any hp...
-
Road Grabber replied to the thread RB Cam Performing Right?.I get it. It’s typical to find things out when you venture into personal uncharted waters when you leave stock high performance using...
-
Road Grabber replied to the thread RB Cam Performing Right?.Thanks for that info and calculated estimate. I did request future dyno testing with headers and manifolds. If the numbers don’t...
-
Road Grabber replied to the thread RB Cam Performing Right?.A lot to absorb here but I do like the attention to detail. I’m not a track runner but I like to see the experience flow out on the post...
-
Road Grabber replied to the thread RB Cam Performing Right?.The lifters installed correctly. I wasn’t aware of the longer TF valves but the correct number of threads were showing on the rockers...
-
Road Grabber replied to the thread RB Cam Performing Right?.Good input. He’s measuring the actual length needed now. I’m not sure if that will be different from original typical aftermarket length...
-
Road Grabber replied to the thread RB Cam Performing Right?.I did mention about the rocker threads showing. He will double check that. I believe it was two threads showing from memory
-
Road Grabber replied to the thread RB Cam Performing Right?.The pushrods were aftermarket Isky but they were rods that I had for many years. You could be right about the spring pressure being too...
-
Road Grabber replied to the thread RB Cam Performing Right?.The stock 440 has 490 torque and that was the disappointing result. A lot of expense and time for stock torque results. I guess the cam...
-
Road Grabber replied to the thread RB Cam Performing Right?.He had headers. I will ask him for a test with headers. Thanks